Frigidaire / Electrolux Washer drive motor, single phase 5304511356

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer fails to spin
• Washer fails to agitate or tumble
• Clothes remain unusually wet at the end of a cycle
• Motor hums but does not start
• Burning electrical smell during operation
• Loud motor or bearing noise

Check Before Replacing

• Disconnect power before inspection.
• Confirm that the symptom occurs during a cycle where the motor should operate; do not assume the motor is defective solely because the washer will not spin or agitate.
• With power disconnected, inspect the accessible drive belt, motor pulley, and surrounding area for obvious damage, looseness, or belt contact marks.
• Check whether the motor shaft or pulley is visibly loose or difficult to turn by hand without forcing it.
• If the motor operates with an empty tub but not with a loaded tub, consider control or load-related causes before replacing the motor.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation.
• Wear work gloves when accessing and handling the motor or nearby washer components.
• Inspect the belt, pulley, and motor mounting area while the motor is accessible; replace or repair related damaged components as required by the appliance’s service information.
• After installation, verify that the motor wiring connector is fully seated and that the drive belt tracks correctly before operating the washer.

Verified Compatible Models

FFTW4120SW, FFTW4120SW0, FFTW4120SW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.