Frigidaire Washer drain pump assembly 5304511363

Genuine OEM drain pump assembly that removes water from the washer during the drain cycle.

Is This the Right Part?

Common Symptoms

• Water remains in the tub after the drain cycle.
• Draining is slow or incomplete.
• Humming, buzzing, or grinding occurs during the drain cycle.
• The washer may stop or repeatedly reinitiate a cycle because water has not been removed.

Check Before Replacing

• Disconnect electrical power before inspection.
• Check the drain hose for kinks, blockage, or improper placement before identifying the pump as the cause.
• Safely remove any residual water that could spill during inspection.
• If access is provided by the appliance service documentation, inspect the pump inlet and impeller area for clothing, coins, sediment, or other obstructions.
• With power disconnected, visually inspect the pump housing, hose connections, and wiring connector for visible damage or leakage.
• Do not conclude that the pump is defective until hose restrictions, obstructions, and visible wiring problems have been considered.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM drain pump assembly.
• Designed for Frigidaire washers.
• Removes water during the washer drain cycle.
• Listed by the official Frigidaire parts source as item 4584305 and manufacturer part 5304511363.
• The part is also documented as a 120-volt, 60-Hz washer drain pump by an established appliance-parts distributor.

Installation Notes

• Disconnect electrical power before beginning installation.
• Safely drain or contain residual water before disconnecting pump hoses.
• Wear work gloves to help protect hands from sharp cabinet edges or debris.
• Use the appliance-specific service documentation to identify the pump access point and reconnection procedure.
• After installation, check hose and pump connections for leaks and verify that the washer drains normally.

Verified Compatible Models

FFTW4120SW, FFTW4120SW0, FFTW4120SW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.