Frigidaire Microwave Won't Mount Securely? Mounting Kit 5304513469 – Complete OEM Hardware & Template Fix

If your Frigidaire or Electrolux over-the-range microwave is missing mounting hardware, came with an incomplete kit, or needs replacement brackets and templates, 5304513469 is the genuine OEM solution. In most Frigidaire-built over-the-range microwaves, the mounting system requires a specific set of wall bolts, cabinet screws, brackets, and alignment templates — when any component is missing or damaged, the microwave cannot be safely or accurately secured. ⚡ Common need during microwave replacement, relocation, or post-shipping hardware loss. Part 5304513469 is the genuine OEM mounting kit that includes all hardware and precision templates required for a complete, aligned, code-compliant installation.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your microwave is a Frigidaire or Electrolux over-the-range model in the FFMV, FGBM, FMOS, FMOW, GMOS, or PMOS series
• ✔ The microwave itself functions normally — only the mounting hardware or templates are missing or damaged
• ✔ You are installing a replacement microwave and the original hardware kit is lost or unusable
• ✔ Existing wall studs and upper cabinet are intact — no structural repair needed
• ✔ ONLY problem is missing, stripped, or incomplete mounting screws, bolts, brackets, or alignment templates

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Microwave not mounting securely to wall or upper cabinet — most common install issue
• Missing mounting screws, bolts, or brackets from original or replacement packaging
• No alignment templates included — unable to accurately mark drill points
• Stripped or cross-threaded mounting bolts that won't torque properly
• Microwave feels loose or shifts after installation
• Hardware lost during a kitchen renovation or microwave relocation

✔ If these symptoms match, this is the correct hardware kit for your installation.

✔ Using genuine OEM hardware and templates ensures proper fit, correct alignment, and a safe, code-compliant mount.

📦 Part Details

• Part Number: 5304513469
• Type: Over-the-Range Microwave Mounting Kit with Alignment Templates (screws, bolts, brackets, and templates)
• Replaces: OEM direct-fit mounting hardware for compatible Frigidaire and Electrolux over-the-range microwave models (no modification required)
• Brands: Frigidaire, Electrolux

⚙️ Installation

Skill Level: Moderate — 30–60 minutes (two-person job). Disconnect power to the microwave at the breaker before beginning. Use the included alignment templates to mark wall stud and upper cabinet hole positions accurately before drilling — use a stud finder to confirm stud locations. One person should support the microwave while the other drives the wall bolts and cabinet screws; torque all fasteners to manufacturer specifications. Do not over-torque — stripped threads in the cabinet or wall plate will require additional repair.

✓ Compatible Models

Confirmed compatible with Frigidaire and Electrolux FFMV, FGBM, FMOS, FMOW, FPBM, GMOS, PMOS, UMV, and EMOW series over-the-range microwave models. Contact us to verify your model number before ordering.

🔗 Model Hub Pages

Frigidaire Oven 31-2649-00-09

💡 Pro Tip