Frigidaire / Electrolux Dishwasher circulation pump assembly with heater; complete 120V circulation pump 5304514365, Replaces A00210602, A00210627

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher fills and drains but does not clean dishes effectively
• Spray arms do not spin or have weak water flow
• Continuous humming, grinding, whining, or other unusual noise during washing
• Dishwasher stops during the wash portion of the cycle
• Possible leakage from the circulation-pump area

Check Before Replacing

• After disconnecting electrical power, check that the spray arms and filters are not visibly blocked by debris.
• With the dishwasher operating normally and safely closed, observe whether the spray arms change position between checks, indicating water circulation; do not reach into the running appliance.
• Listen during the wash portion of the cycle for abnormal continuous humming, grinding, or whining from the pump area.
• Confirm that the dishwasher is receiving water and that the issue is limited to wash circulation rather than filling or draining.
• Before condemning the pump, also check for blocked spray-arm openings, clogged filters, low water level, or other conditions that can reduce wash performance.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation.
• Shut off the dishwasher water supply before servicing plumbing connections.
• Wear work gloves to protect hands from sharp sheet-metal edges and component surfaces.
• Verify the dishwasher model and replacement-part number before installation; do not rely on symptoms alone for compatibility.
• Inspect the pump area and connected seals or hoses during service for signs of debris, leakage, or damage.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.