Electrolux / Frigidaire Washer Pump Assembly, Drain, Jet System 5304514775, Replaces 5304505248, 5304509619

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remains in the tub after a drain or spin cycle.
• Drain cycle is unusually slow.
• Loud or abnormal noise occurs while the washer is draining.
• Water leaks from the pump area.
• Washer may stop mid-cycle when water cannot be evacuated.

Check Before Replacing

• With the washer unplugged, inspect the accessible drain-pump filter or coin trap, if equipped, for lint, coins, or other obstructions.
• Inspect the external drain hose for kinks, blockage, or improper routing before condemning the pump.
• During a drain cycle, observe whether water exits the drain hose and listen for abnormal pump noise; do not assume the pump is defective without ruling out hose or filter restrictions.
• Inspect the pump area and hose connections for visible leakage, cracks, or loose connections.
• Use the appliance's model-specific service diagnostics or electrical test procedure only if the applicable service documentation specifies the procedure and limits.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before installation.
• Wear work gloves because access areas inside washers may contain sharp edges.
• Confirm the full appliance model number before installation.
• Reconnect the pump's hose connections and electrical harness exactly as found, ensuring hoses are not kinked.
• After installation, run an appropriate drain test and inspect the pump and hose connections for leaks before returning the appliance to service.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.