The 5304519166 is the genuine OEM baffle assembly for Frigidaire refrigerators. The baffle assembly controls airflow between the freezer and fresh food compartments — it acts as a damper or air gate that regulates how much cold air passes from the evaporator into the refrigerator section. When the baffle cracks, warps, or fails to open and close properly, the refrigerator loses the ability to maintain consistent temperatures, leading to warm spots, over-cooling, or excessive frost buildup. This is a direct OEM replacement for a precise fit with no modifications required.

✓ Model-Specific Repair Pages

The baffle assembly is typically located at the top or rear of the fresh food compartment, mounted over the air duct that connects to the evaporator. It may be motorized (controlled by the main board) or passive (a simple flap). A motorized baffle that fails in the closed position causes the refrigerator section to warm up; one stuck open causes over-cooling and freezing of fresh food. Inspect the baffle motor and wiring harness during installation — a failed motor or broken connector is often the root cause rather than the baffle body itself.

✓ Common Symptoms Fixed

• Refrigerator section too warm while freezer is functioning normally
• Fresh food compartment freezing food unexpectedly
• Uneven temperatures between shelves or compartments
• Excessive frost buildup in the fresh food section
• Temperature fluctuations that don't stabilize after door closings
• Refrigerator running continuously without reaching set temperature

✓ Key Features & Specifications

• OEM part number: 5304519166
• Type: Refrigerator baffle assembly (air damper / air gate)
• Compatible brand: Frigidaire and affiliated brands
• Direct OEM replacement — no modifications required
• Cold-resistant construction — resists warping and cracking at operating temperatures

✓ Buying Options

OEM (5304519166): The genuine Frigidaire factory baffle assembly. Correct dimensions, motor specifications (if motorized), and mounting configuration for a leak-free, properly sealed installation.

✓ Replacement Part Numbers

• 5304519166 (current OEM)

✓ Installation Tips

• Unplug the refrigerator before beginning any disassembly.
• Locate the baffle assembly at the top or rear of the fresh food compartment — it is typically covered by a plastic panel secured with 2–4 screws.
• Disconnect the wire harness connector from the baffle motor before removing the assembly.
• Inspect the wire harness and connector for corrosion or damage — a faulty connector is a common cause of baffle failure.
• Remove the old baffle assembly and install the new one, ensuring it seats flush against the air duct housing with no gaps.
• Reconnect the wire harness and reinstall the panel.
• Plug in the refrigerator and allow 24 hours for temperatures to stabilize before evaluating performance.
• If temperature issues persist after replacement, inspect the main control board and thermistor before assuming baffle failure.