5304524920 Dishwasher Drain Pump

5304524920 Dishwasher Drain Pump

Sale price
$312.56
Regular price
$340.69

XPart Verified Replacement  |  SKU 9665459650849

Frequently Bought Together

OEM REPLACEMENT PART

5304524920 Dishwasher Drain Pump

Part# 5304524920 Replaces 5304475636 Fits Frigidaire Fits Electrolux Fits Kenmore

Dishwasher Not Draining? Drain Pump 5304524920 – Fix Standing Water Fast

Standing water at the bottom of your dishwasher after a cycle is a clear sign the drain pump has failed. In most Frigidaire, Electrolux, and Kenmore dishwashers, this is caused by a failed drain pump motor. When it fails, dirty water cannot be expelled at the end of the wash cycle, leaving dishes sitting in contaminated water and preventing the next cycle from starting properly. ⚡ Common failure point in Frigidaire-built dishwashers. Part 5304524920 is the genuine OEM replacement that restores full drainage and gets your dishwasher running normally again.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

  • ✔ Dishwasher powers on and completes the wash cycle normally
  • ✔ Spray arms and wash functions work correctly
  • ✔ Water supply and inlet valve confirmed OK
  • ✔ ONLY problem is water remaining in the tub after the cycle ends

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

  • Standing water in the bottom of the dishwasher after the cycle
  • Dishwasher stops mid-cycle with water still inside
  • Humming or grinding noise during the drain phase with no water movement
  • Error codes related to draining (e.g., i30, i50 on Frigidaire/Electrolux models)

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this drain pump restores normal drainage immediately.

📦 Part Details

  • Part Number: 5304524920
  • Type: OEM Dishwasher Drain Pump Motor Assembly
  • Replaces: 5304475636, 5304491458, 5304497818
  • Brands: Frigidaire, Electrolux, Kenmore
⚠️ Recommended While Repairing:
While the dishwasher is open, inspect the drain hose and check valve for blockages or cracks — a damaged hose can cause the new pump to fail prematurely. Replacing both at the same time saves a second service call.

⚙️ Installation

Skill Level: Moderate — 45–60 minutes. Disconnect power and turn off the water supply before servicing. Remove the lower spray arm and filter assembly to access the pump housing, disconnect the wiring harness and drain hose, then swap in the new pump and reassemble in reverse order. Run a short cycle to confirm drainage before closing up.

✓ Compatible Models

Confirmed compatible with Frigidaire FGHD2455LB0, FGHD2472PF0, FGHD2491LB0, Electrolux EIDW5705PB0A, EIDW5705PS0A, EIDW5705PW0A, Kenmore 58715412100A, 58715413100A, 58715423100A, and additional Frigidaire-platform models. Contact us to verify your model number before ordering.

💡 Pro Tip

Check the Filter First:
Before replacing the pump, remove and clean the dishwasher filter — a severely clogged filter can mimic a failed drain pump. If cleaning the filter doesn't resolve standing water within one cycle, the pump motor has failed and this part is your fix. Cleaning the filter at the same time as the pump replacement extends the life of the new part significantly.

✅Compatibility & Cross Reference

Part number 5304524920 replaces 5304475636, 5304491458, 5304497818

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions