Oven Rack Warped, Bent, or Missing? Flat Oven Rack 5304536394 – Direct OEM Replacement

A warped, bent, or missing oven rack makes it impossible to cook evenly and safely — and a cheap aftermarket rack won’t fit or slide correctly. In most Frigidaire ranges and wall ovens, the flat oven rack is a high-wear item that warps from repeated high-heat cycles or gets damaged during cleaning. When it fails, pans tilt, food cooks unevenly, and the rack may stick or refuse to slide smoothly on the oven guides. ⚡ Common wear item in Frigidaire-built ranges and wall ovens. Part 5304536394 is the genuine OEM flat rack that fits the oven cavity correctly, slides on the guides as designed, and handles full baking temperatures without warping.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your oven powers on and heats to temperature normally
• ✔ The oven door, hinges, and guides are in good condition
• ✔ Your oven cavity dimensions match the Frigidaire standard rack size
• ✔ The rack guides inside the oven are undamaged and level
• ✔ ONLY problem is a warped, bent, broken, or missing flat oven rack

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Oven rack is visibly warped or bowed — pans won’t sit level
• Rack sticks, drags, or won’t slide smoothly on the oven guides
• Rack tips or shifts when loading heavy pans or roasting dishes
• Rack is bent from being dropped or forced during a self-clean cycle
• Rack is missing entirely and needs a direct OEM replacement
• Food cooks unevenly due to rack not sitting flat in the oven cavity

✔ If these symptoms match, this is the correct replacement component for your oven.

✔ In most cases, swapping in this OEM rack restores level, smooth, safe cooking immediately.

📦 Part Details

• Part Number: 5304536394
• Type: Flat Oven Range Rack – standard flat wire rack for oven cavity use
• Replaces: OEM direct-fit flat oven rack — genuine Frigidaire replacement (no modification required)
• Brands: Frigidaire, Electrolux
• Condition: Certified Pre-Owned

⚙️ Installation

Skill Level: EASY — Under 2 minutes. No tools required and no power disconnect needed for a rack swap. Allow the oven to cool completely before reaching inside. Angle the rack slightly to align the side tabs with the guide rails, slide it in until it seats fully, and confirm it sits level and slides without binding. Do not use this rack during a self-clean cycle — remove it beforehand to prevent warping.

✓ Compatible Models

Confirmed compatible with Frigidaire and Electrolux range and wall oven models using the 5304536394 flat rack. Contact us to verify your model number before ordering.

💡 Pro Tip