A DAMAGED OR LOOSE ELBOW CONNECTION AT THE DRYER EXHAUST OUTLET
Frigidaire C24 close elbow / dryer vent connector 5305514872, Fixes A damaged or loose elbow connection at the dryer exhaust outlet
Genuine OEM 90-degree close-elbow dryer vent connector with screw clamp; the Frigidaire parts listing identifies it as a C24 close elbow and shows a 1-inch grid for scale.
Part 5305514872Replaces 5304414872, 5304436087, DRYER90Frigidaire
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number5305514872
Replaces5304414872, 5304436087, DRYER90
ManufacturerFrigidaire
Appliance TypeDryer
Part TypeC24 close elbow / dryer vent connector
✅ Cross Reference Information
Current Part Number5305514872
Replaces5304414872, 5304436087, DRYER90
Common Symptoms
- Visible crushing, damage, or deformation of the close elbow.
- A loose or detached connection between the dryer outlet and exhaust duct.
- Restricted exhaust airflow at the elbow or connected ductwork, which can contribute to poor venting or longer drying times.
Check Before Replacing
- With the dryer off and cool, inspect the elbow for visible damage, crushing, separation, or a connection that does not sit securely at the dryer outlet or duct.
- Inspect the connected exhaust tube for bends, restrictions, lint blockage, or crushing near the close elbow.
- Check that the outdoor vent hood/damper is unobstructed and that the lint screen is clean before attributing drying performance to the elbow.
Pro Tip
A close elbow is useful for a tight 90-degree turn, but elbows add airflow resistance; keep the overall vent route as straight and unrestricted as the dryer installation instructions allow.
Part Details
Part Number5305514872
Part TypeC24 close elbow / dryer vent connector
ManufacturerFrigidaire
Appliance TypeDryer
Primary FunctionConnects and redirects a dryer exhaust duct through a close 90-degree turn, helping route venting where rear-wall clearance is limited.
Installation Notes
- Disconnect electrical power before moving the dryer or working on the rear exhaust connection.
- Confirm the elbow is appropriate for the appliance's vent route and does not leave the connected duct bent, crushed, or restricted.
- After installation, verify that the complete exhaust path and outdoor vent outlet are clear; gas dryers must vent outdoors.
- Follow the installation instructions for the specific dryer, including its vent-length and elbow limitations.
Verified Compatible Models
DEA500C1D, DEA500C1T, DEA500C1V, DEA500C1W, DEA501C0W, UAN7323D, UAN7347A, UAN8508C, 41779042900, 41788980100, 41794042500, 41799985840, DE18A3WLFA, DE18A5WLFA, DE18A5WLFB, DE18A6WLFA, DE18A8WLFA, DE18T2DLFA, DE18T2WLFA, DE460LXW1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
