Bosch Dishwasher water inlet valve (Bosch designation: valve access / inlet valve) 10023853, Replaces 00637572, 637572

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher will not fill with water
• Poor cleaning caused by insufficient water entering the tub
• Water leaking from the inlet-valve area
• Dishwasher may overflow if the valve remains open or fails to shut off
• Unusual inlet-valve noise during filling

Check Before Replacing

• Confirm the household water shutoff valve is fully open.
• Inspect the dishwasher water-supply hose for kinks, crushing, or blockage.
• With power disconnected and the water supply shut off, inspect the valve body and hose connections for cracks, corrosion, or signs of leakage.
• Check the inlet screen or filter area for visible sediment without disassembling or attempting to clean the valve.
• If qualified to perform live electrical testing, verify that the valve receives its specified control voltage during a fill request; absence of voltage can indicate a control, wiring, or safety-device issue rather than a failed valve.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the dishwasher water supply before servicing.
• Remove the lower access area as required to reach the inlet valve.
• Disconnect the water-supply connection, valve-to-dishwasher water connection, and electrical connector from the old valve.
• Install the replacement valve and reconnect the water lines and electrical connector securely.
• Restore the water supply and power, then check the valve connections for leaks during a fill cycle.

Verified Compatible Models

SHE3AR72UC/22, SHE3AR75UC/22, SHE3AR76UC/24, SHE3AR76UC/28, SHEM3AY55N/28, SHEM3AY56N/25, SHS5AVF2UC/22, SHVM4AYB3N/28, SHX5AV52UC/22, SHX5AV56UC/22, SHX5AVF5UC/22, SHXM4AY55N/24, SHXM4AY55N/25, SHXM4AY55N/26, SHXM4AY55N/27

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.