LG Pressure Switch Assembly / Washer Water-Level Pressure Switch 6601ER1006F, Replaces 6601ER1006V, 6601ER1006T, 6601ER1006H, 6601ER1006J

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer continues filling after reaching the expected level
• Washer does not fill properly or fills slowly
• Washer may stop during a cycle or display a pressure/water-level error
• Incorrect water level can contribute to abnormal fill, drain, or wash-cycle behavior

Check Before Replacing

• Unplug the washer and shut off both water supplies before inspection.
• Verify that the pressure hose is securely connected at the switch and tub, with no visible kinks, cracks, leaks, or blockage.
• Inspect the pressure-switch wiring connector for looseness, corrosion, or visible damage.
• If the hose is removed for inspection, check that its passage is clear; do not apply excessive air pressure or force.
• Confirm the replacement part number against the washer model and the number printed on the original component before ordering.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer water supplies before beginning service.
• Follow the access and mounting procedure for the specific washer model; appliance layouts vary.
• Reconnect the pressure hose and wiring harness securely and ensure the hose is not kinked or pinched.
• After installation, restore water and power and observe a fill cycle for proper operation and leaks.

Verified Compatible Models

WM1355HR, WM1355HW, WM1377HW, WM1385HW, WM1388HW, WM3455HS, WM3455HW, WM3477HS, WM3477HW, WM3488HS, WM3488HW, WM3499HVA, F1403RD, F14A8FD, LUWD1CW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.