AUTOMOTIVE PART
Cardone Axle Assembly 664355
Axle Assembly, 100% New
Part 664355CardoneAxle Assembly
Vehicle fitment has not yet been verified for this part.
Confirm the year, make, model, engine, drivetrain and required position before ordering.
Confirm the year, make, model, engine, drivetrain and required position before ordering.
Is This the Right Part?
Manufacturer Part Number664355
ManufacturerCardone
Part TypeAxle Assembly
Part Details
Part Specifications
| Axle Nut Locking Type | Stake |
|---|---|
| ABS Ring Included | No |
| ABS Ring Tooth Count | 0 |
| Compressed Length (in) | 31.32 |
| E-Waste | No |
| FAQs | Always use the proper press type tool to remove the old stub sha |
| FAQs | Are the CV Drive Axle shafts balanced at the factory? |
| FAQs | Can I let the CV Drive Axles hang while I am working on the car? |
| FAQs | I hear a grinding noise from the front end while driving and see |
| FAQs | I installed a replacement CV drive axle and now my ABS light is |
| FAQs | I removed both CV drive axles at the same time and now I am havi |
| FAQs | Is it OK to use an impact hammer to install the retaining nut? |
| FAQs | Never allow the CV Drive Axles to hang unsupported. This can lea |
| FAQs | Never use an impact wrench to install the retaining nut on the C |
| FAQs | NO! A prevailing torque lock nut should never be reused. Always |
| FAQs | Shafts are inspected 100% for run out to prevent vibrations. On |
| FAQs | The most likely cause is a broken bearing cage due to excessive |
| FAQs | The most likely cause is a defective or worn outer CV drive axle |
| FAQs | The most likely cause is the drive train shifting in the chassis |
| FAQs | The most likely problem is the outer CV drive axle boot has rupt |
| FAQs | The old CV Drive Axle has a locking style (prevailing torque) nu |
| FAQs | The transaxle gear alignment has been lost. On some vehicles it |
| FAQs | The wheels wobble when I make a turn. What's the problem? |
| FAQs | The CV Drive Axle outboard joint stub shaft is stuck in the hub |
| FAQs | When replacing CV Drive Axle assemblies, always install new tran |
| FAQs | When the replacement drive axle was installed, the sensor ring, |
| FAQs | When I cut the wheel hard and step on the gas, I hear loud click |
| FAQs | When I replace the CV drive axles, should I reuse the old seals? |
| FAQs | When I step on the gas, I hear a loud thump and feel a bad vibra |
| Input Shaft Connection Style | Splined |
| Input Shaft Spline Count | 20 |
| Output Shaft Connection Style | Splined |
| Output Shaft Spline Count | 23 |
| Package Contents | Complete Axle, Instruction Sheet |
| Product Condition | New |
| Spindle Nut Included | Yes |
Vehicle Fitment
Fitment status: Vehicle fitment has not yet been verified for this part. Confirm the exact year, make, model, engine, drivetrain and part position before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
