Bosch Refrigerator 687508, Replaces 00687508 Fridge Installation Set Secure OEM Mounting Hardware for Installation
A fridge that rocks, tilts, or won't sit flush is a safety hazard — and the fix is almost always a missing or failed installation set. In most Bosch and Siemens refrigerators, improper mounting is caused by missing, broken, or incorrect installation hardware. When the installation set fails or is absent, the fridge cannot be secured to cabinetry or levelled correctly, leading to door misalignment, vibration noise, and potential tipping risk. ⚡ Common oversight during fridge replacement or kitchen renovation in Bosch-built refrigerators. Part 687508 (superseded by 00687508) is the genuine OEM installation set that provides all required mounting hardware for a secure, professional-grade refrigerator installation.
Bosch Refrigerator 687508
Is This the Right Part?
Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.
- ✔ Your fridge powers on and runs normally — this is a mechanical/mounting issue only
- ✔ The fridge rocks, tilts, or cannot be secured to surrounding cabinetry
- ✔ You are installing a new fridge or replacing damaged mounting hardware
- ✔ ONLY problem is improper mounting, levelling, or securing of the refrigerator unit
- Refrigerator rocks or wobbles on the floor
- Fridge door misaligned — won't close flush or seal properly
- Vibration or rattling noise during operation
- Unable to secure fridge to adjacent cabinetry or anti-tip bracket
- Missing hardware from original installation or previous repair
- Part Number: 687508
- Superseded By: 00687508
- Type: OEM Refrigerator Installation Set — mounting and securing hardware kit
- Replaces: 687508, 00687508
- Brands: Bosch, Siemens
Never fully tighten mounting hardware until the fridge is confirmed level in all directions. A fridge installed even slightly off-level will cause the door gasket to wear unevenly, the compressor to work harder, and ice/water to pool incorrectly in the interior. Take the extra 5 minutes to get it right — your compressor and door seals will thank you for years.
Part Details
Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.
This is the correct fix if ALL of the following are true:
Not sure? Send us your model number — we'll confirm before you order.
✔ If these symptoms match, the installation set is the most likely missing or failed component.
✔ In most cases, installing Part 687508 restores secure, level, and properly aligned refrigerator positioning immediately.
Skill Level: Easy — 20–40 minutes. No special tools required beyond a screwdriver and level. Disconnect power before servicing if any electrical panels are accessed. Position the fridge in its final location, use the included hardware to secure the unit to cabinetry or the floor bracket as applicable, then use a spirit level to confirm the unit is plumb front-to-back and side-to-side before tightening all fasteners.
Confirmed compatible with Bosch and Siemens refrigerator models using part number 687508 or 00687508. Refer to your model's installation diagram to confirm hardware placement. Contact us to verify your model number before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
