INCORRECT FILL OR HEATING-CYCLE PROGRESSION
Miele Dishwasher Pressure switch 1100/700 mm/WS (water-level/heater pressure switch) 6996821, Fixes Incorrect fill or heating-cycle progression
Genuine Miele dishwasher pressure switch used to monitor water or circulation pressure through the connected hose. The part is identified in Miele technical parts documentation as a pressure switch 1100/700 mm/WS.
Part 6996821Replaces 06996820, 06190703, 06190702, 06190701, 06190700Miele
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number6996821
Replaces06996820, 06190703, 06190702, 06190701, 06190700
ManufacturerMiele
Appliance TypeDishwasher
Part TypePressure switch 1100/700 mm/WS (water-level/heater pressure switch)
✅ Cross Reference Information
Current Part Number6996821
Replaces06996820, 06190703, 06190702, 06190701, 06190700
Common Symptoms
- Dishwasher may overfill or stop before reaching the expected water condition.
- Wash program may pause or stop during operation.
- A pressure-related fault code or flashing fault indication may occur on some Miele models.
- Heating may be inhibited when the switch does not report the expected pressure condition.
Check Before Replacing
- Confirm the appliance model and existing switch marking before ordering; do not assume a pressure-switch fault from symptoms alone.
- With the dishwasher disconnected from electrical power and water supply, visually inspect the pressure hose for kinks, disconnection, visible residue, or blockage.
- Check that the hose is firmly seated at the switch and that the switch is not visibly cracked or leaking.
- Record any displayed fault code and compare it with the model-specific Miele service documentation.
- If electrical testing is required, have it performed by a qualified appliance technician; do not bypass or jumper the pressure switch.
Pro Tip
Inspect the thin pressure hose and its connections before replacing the switch, because a blocked, kinked, or poorly seated hose can produce pressure readings that resemble switch failure.
Part Details
Part Number6996821
Part TypePressure switch 1100/700 mm/WS (water-level/heater pressure switch)
ManufacturerMiele
Appliance TypeDishwasher
Primary FunctionMonitors dishwasher water/circulation pressure through the connected hose and changes electrical contact state when the calibrated pressure condition is reached.
Installation Notes
- Disconnect electrical power and shut off the dishwasher water supply before accessing the component.
- Use the model-specific Miele service documentation for access and removal instructions; appliance construction varies by model.
- Before disconnecting the old switch, document connector and hose routing so the replacement is reconnected identically.
- Ensure the pressure hose, electrical connectors, retaining features, and any supplied seals are fully seated before testing.
- After installation, inspect for leaks and run an appropriate test cycle while monitoring fill, circulation, heating progression, and fault indications.
Verified Compatible Models
G1020, G1021, G1022, G1023, G1040, G1042, G1043, G1102, G1120, G1130, G1140, G1142, G1143, G1150, G1152
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
