Bosch Dishwasher Electronic Control Board / Control Unit 701523, Replaces 00669136, 669136 – Superseded by 00701523

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher has power but will not start
• Controls or display may be unresponsive
• Dishwasher may stop during a cycle
• Wash, drain, or dry functions may not operate correctly
• Visible burn marks or damaged components on the module may be present

Check Before Replacing

• Verify the dishwasher has electrical power by checking the outlet, plug, and circuit breaker.
• Confirm the door closes and latches fully, and check whether child lock or control lock is active.
• Perform the Bosch-recommended power reset before concluding that the module is defective.
• Check visible wiring and connectors for looseness, damage, or signs of overheating with power disconnected.
• If accessible and safe, inspect the module for visible burning or damaged components; do not energize or probe the board unless qualified.
• Confirm the appliance model number and compare the installed module markings with Bosch part 00701523 before ordering.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the dishwasher before accessing or replacing the module.
• Verify the dishwasher model and part marking before installation; Bosch recommends checking appliance compatibility by model number.
• Document connector locations and wiring orientation before disconnecting the old module.
• Handle the electronic board by its edges and avoid contact with exposed circuitry.
• Reconnect all harnesses securely and reinstall any supplied cover or cap before restoring power.
• If the replacement module requires model-specific configuration or the appliance remains inoperative, use Bosch service documentation or a qualified appliance technician.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.