Whirlpool Dryer drum belt 8066065

Whirlpool dryer drive belt used to transfer motor power to the dryer drum.

Is This the Right Part?

Common Symptoms

• Drum will not tumble or rotate.
• Drum stops turning during a cycle.
• Motor runs but the drum does not move.
• Intermittent drum rotation caused by belt slipping or stretching.

Check Before Replacing

• With power disconnected, inspect the belt for breaks, severe fraying, stretching, or separation.
• If the motor operates but the drum does not rotate, verify whether the belt is broken or has come off the drum and pulley path.
• Confirm the belt routing against the appliance-specific service documentation before replacement.

Pro Tip

Part Details

Key Features

• Drive/drum belt.
• Length: 92-1/4 inches.
• Width: 1/4 inch.
• 4 ribs.
• 3 grooves.

Installation Notes

• Disconnect electrical power before servicing.
• The installation requires routing the belt around the drum, motor pulley, and idler pulley according to the dryer model's configuration.
• Use the appliance-specific parts diagram or service documentation to verify routing.

Verified Compatible Models

7MLGR7620MW1, 7MLGR7648PW0, 7MWG99930VH0, 7MWG99930VW0, 8BLGR5636JQ0, 8BLGR5636JQ1, 8543000, 11066522501, 11066662500, 11066864501, LGB6400LW0, WGD5800SG0, 7MGGX9868JQ1, 7MWG77900SW0, LEQ9508KQ0, LEQ9508PW0, YLEN1000PQ0, YLEN2000JQ1, YWED7990XG0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.