Frigidaire / Electrolux Range Triple surface element control switch (triple infinite switch) 807004702

Is This the Right Part?

Common Symptoms

• The burner does not heat when the control is turned on.
• The burner remains energized or heats continuously instead of cycling.
• The heat setting cannot be adjusted normally.
• One or more concentric heating zones fail to activate when selected.

Check Before Replacing

• Disconnect electrical power to the range before inspection.
• Confirm the symptom is limited to the surface element controlled by this switch and that other range functions operate normally.
• With power disconnected, visually inspect the switch area and accessible wiring for loose, burned, or damaged connections.
• Check that the control knob turns the switch through its normal range without slipping or binding.
• Do not conclude that the switch is defective until the element, wiring, and connections have also been checked by a qualified technician or with manufacturer-approved electrical testing procedures.

Pro Tip

Part Details

Installation Notes

• Disconnect power by unplugging the range or switching off the range circuit breaker before installation.
• Wear work gloves when handling the range components.
• The switch is mounted behind the range control panel; remove the control knob and mounting hardware as applicable to the appliance design.
• Transfer the wiring from the old switch to the replacement, then secure the replacement switch and reinstall the knob and control-panel parts.
• Restore power only after the switch and control-panel components are secured.

Verified Compatible Models

79092652810, 79092653810, 79092657810, 79092659810, 79095053315, 79095059315, CGEH3047VFC, CGEH3047VFD, CGEH3047VFE, EI30EF45QSF, FGEH3047VDA, FGEH3047VDC, FGEH3047VDD, FGEH3047VFA, FGEH3047VFD

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.