Frigidaire / Electrolux Refrigerator Evaporator Fan Motor With Harness 808602601 – Superseded by 808602602

OEM refrigerator evaporator fan motor with harness. It circulates cold air from the evaporator/freezer area through the refrigerator for cooling. The original 808602601 is replaced by OEM part 808602602.

Is This the Right Part?

Common Symptoms

• Freezer or refrigerator compartment not cooling properly
• Fresh-food compartment warm while the freezer remains cold
• Reduced or absent airflow from the evaporator area
• Unusual fan noise or grinding
• Frost or ice buildup associated with inadequate air circulation

Check Before Replacing

• With the refrigerator unplugged, visually inspect the fan blade for ice obstruction, debris, or damage.
• With power disconnected, gently turn the fan blade by hand; it should rotate freely without binding.
• Inspect the motor and harness connectors for looseness, corrosion, damaged terminals, or pinched wiring.
• If the refrigerator supports a manufacturer service-diagnostic fan test, observe whether the evaporator fan starts and runs normally; follow the appliance-specific service instructions.
• Do not assume the motor is defective until airflow obstructions, connector problems, wiring faults, and defrost-related ice buildup have been considered.

Pro Tip

Part Details

Key Features

• OEM Frigidaire/Electrolux evaporator fan motor assembly with harness
• Replacement production number FD-F6110A-6022 is documented for the current OEM replacement
• The assembly is intended to circulate air through the fresh-food compartment for efficient cooling
• The current OEM replacement is documented as 808602602 and replaces 808602601
• The exact-replacement listing describes a 120-volt, 6-watt, 0.1-amp motor with attached harness components

Installation Notes

• Unplug the refrigerator before installation and safely protect food that could deteriorate while power is off.
• Wear work gloves when accessing the evaporator-fan area.
• Inspect and clear any ice or obstruction around the fan before fitting the replacement assembly.
• Transfer or reconnect the harness only as specified for the appliance model, ensuring connectors are fully seated and wiring is not pinched.
• Confirm the replacement part against the refrigerator model before installation because evaporator-fan assemblies can vary by model.

Verified Compatible Models

25355333607, BFHS2611LM0, BFHS2611LM1, BFHS2611LM2, CRSE230KW0, CRSE234JB2, CRSE234JB3, CRSE234JQ2, CRSE234JQ3, CRSE234JSM2, CRSE234JSM3, CRSE234JW2, CRSE234JW3, CRSE264JB2, CRSE264JQ2, CRSE264JSS2, CRSE264JW2, CRSH232PB0, CRSH232PB1, CRSH232PB2, CRSH232PB3, CRSH232PB5, CRSH232PB6, CRSH232PB7A, CRSH232PB8A, CRSH232PB9A, CRSH232PBEA, CRSH232PS0, CRSH232PS1, CRSH232PS3, CRSH232PWDA, DFHS2313MFHA, DFHS2313MFJA, DFHS2313MFKA, FFHS2311LBPA, FFHS2311LWNA, FFHS2311LWQA, FFHS2322MBKA, FFHS2322MBLA, FFHS2322MBMA, FFHS2322MSJA, FFHS2322MSKA, FFHS2322MWJA, FFHS2322MWKA, FFHS2622MSZA, FFSS2325TE0, FFSS2325TP0, FFSS2325TS0, FFSS2625TE0, FFSS2625TE1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.