Wolf Range Spark Module 0+1 - Svce 815552, Replaces 809420

Wolf service spark/ignition module, cataloged as “Spark Module 0+1 - Svce.” Official Wolf/Sub-Zero parts manuals list part 815552 on sealed-burner rangetop, dual-fuel range, and gas-cooktop configurations; applicable model and serial-number break requirements must be confirmed before ordering.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Several burners fail to produce a spark even though electrical power is supplied.
• Burners do not ignite despite confirmed gas supply and properly positioned, clean, dry burner components.
• Ignition is intermittent across more than one burner.

Check Before Replacing

• Verify the appliance has electrical power and that the household circuit breaker is on.
• Turn power off for at least 30 seconds, restore power, and retest the ignition system.
• Confirm burner caps are correctly positioned and that the burner and igniter areas are clean and completely dry.
• Observe whether the affected burner produces a spark; if it sparks but does not light, the cause may be burner placement, moisture, gas supply, or another ignition component rather than the spark module.
• Do not open or electrically test the module unless qualified service personnel are performing the diagnosis.

Pro Tip

Part Details

Key Features

• Wolf service configuration: Spark Module 0+1 - Svce.
• Controls ignition for the applicable surface-burner system.
• Listed in Wolf/Sub-Zero parts documentation for applicable gas cooktops, sealed-burner rangetops, and dual-fuel ranges.
• Application is model- and serial-number dependent.
• The module itself should not be repaired by the owner; Wolf directs users to Factory Certified Service when basic checks do not resolve the issue.

Installation Notes

• Disconnect electrical power to the appliance before service work.
• Confirm the exact model and serial-number range before installation because Wolf documentation specifies application breaks and alternate modules for some units.
• Record or photograph wiring connections before disconnection only after power has been removed.
• Because access and wiring arrangement vary by model and the module involves high-voltage ignition output, installation should be performed by a qualified appliance service technician.
• After installation, restore power and verify ignition operation according to the appliance's model-specific service procedure.

Verified Compatible Models

CT15G-2, CT15G-3, CT30G-3, CT36G-2, CT36G-3, DF30, DF30-2, DF30-3, DF36, DF36-3, DF366, DF486G, DF604CF, DF604GF, DF606CG, IM15G, IM15G-2, SRT304, SRT364C, SRT364G, SRT366, SRT484CG, SRT484DG, SRT484F, SRT486C, SRT486G

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.