SLOW OR SLIPPING WASHER SPIN
Speed Queen / Alliance Laundry Systems Washer Kit, Idler Lever and Belt 959P3, Fixes Slow or slipping washer spin
Genuine OEM washer idler lever and belt kit. The kit maintains drive-belt tension and includes the idler lever assembly, pulley-related hardware, spring, and agitate-and-spin belt components as specified in Alliance parts documentation.
Part 959P3Speed Queen / Alliance Laundry Systems
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number959P3
ManufacturerSpeed Queen / Alliance Laundry Systems
Appliance TypeWasher
Part TypeKit, Idler Lever and Belt
Common Symptoms
- Slow or inconsistent spin speed
- Belt slipping or loss of drive
- Squealing or unusual belt/idler noise
- Washer does not agitate or spin when the belt or idler mechanism is worn or broken
Check Before Replacing
- Disconnect electrical power before inspecting the belt and idler assembly.
- With power disconnected and the washer safely accessible, visually inspect the belt for cracking, fraying, glazing, looseness, or displacement.
- Inspect the idler lever and pulley for visible cracking, damage, excessive wear, or abnormal looseness.
- If the washer has low RPM, compare the installed spring and belt configuration with the model- and serial-specific parts documentation; Alliance lists a specific idler spring for units experiencing low RPM.
- Do not treat these observations as a definitive diagnosis; other drive-system components can produce similar symptoms.
Pro Tip
The Alliance parts manual identifies 202032 as an idler lever spring used on units experiencing low RPM, so verify the washer’s model and serial-number configuration before selecting or replacing related spring components.
Part Details
Part Number959P3
Part TypeKit, Idler Lever and Belt
ManufacturerSpeed Queen / Alliance Laundry Systems
Appliance TypeWasher
Primary FunctionMaintains drive-belt tension and transfers motor power for washer agitation and spin through the idler lever, pulley, spring, and included agitate-and-spin belt.
Installation Notes
- Disconnect electrical power before servicing the washer.
- Use the washer’s applicable service or parts documentation to access the motor, pump, belt, and idler assembly.
- Install the kit components in the correct model- and serial-specific configuration; Alliance documentation shows that spring and belt selections can vary by configuration.
- Route the included belt according to the appliance service documentation and verify that the idler mechanism applies appropriate belt tension before reassembly.
- After reassembly, check that the belt and idler components are secure and that the drive system operates without abnormal slipping or noise.
Verified Compatible Models
AWN402PP111TW01, AWN432SP113CW04, AWN432SP113FW28, AWN432SP113TW01, AWN432SP113TW04, AWN542SP111TWAH, AWN632SP116CW01, AWN632SP116TW01, AWNE82SP113CW01, AWNE82SP113FW01, AWNE82SP113TW01, AWNE92SP113FW01, AWNE92SP113TW01, AWNE92SP123DW01, AWNE92SP543DW01
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
