LONG-DRIVE BELT WORN OR SLIPPING?
A102 Classical A-Section V-Belt — Reliable Power Transfer
Wrapped 1/2-inch classical A-section belt for compatible fans, blowers, pumps, conveyors and industrial drives.
Verified Cross-Reference Data
Exact: A102, Gates A102, Gates 9002-2102, Timken A102, Timken AP102.
Timken published outside length: 104.4 inches.
Fitment: No reliable model-level fitment was verified. Match the exact A102 designation, 1/2-inch profile and the supplying manufacturer's length specification.
Specifications
- Classical wrapped A-section
- 1/2-inch nominal top width
- Approximately 0.35-inch height
- 40-degree profile
Common Symptoms
- Slip, squeal or chirp
- Slow driven equipment
- Black belt dust
- Cracking, glazing or fraying
Check Before Ordering
- Confirm the complete A102 marking
- Confirm the 1/2-inch A profile
- Verify the manufacturer's length system
- Inspect sheaves, alignment and bearings
Installation
- Lock out power.
- Relieve tension without prying.
- Clean and align sheaves.
- Set specified tension.
- Reinstall guards and test.
FAQ: Do not choose by loose-belt measurement alone. Used belts stretch, and inside, datum and outside lengths differ.
✓ Model-Specific Repair Pages
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
- Choosing a selection results in a full page refresh.
