UPPER RACK IS DIFFICULT TO SLIDE IN OR OUT
LG Dishwasher Upper Dishrack Assembly AHB32983761, Fixes Upper rack is difficult to slide in or out
Genuine LG OEM upper dishrack assembly that holds dishes in the upper section of a dishwasher during the cleaning cycle.
Part AHB32983761Replaces 3750ED1005A, 3750ED1005B, 3750ED1005D, 3750ED1005E, 3751DD1002A, 3751DD1002B, 3751DD1005A, 3751DD1005B, AHB32983725, AHB32983726, AHB32983729, AHB32983734, AHB3, AHB32983762, MGR47998501LG
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberAHB32983761
Replaces3750ED1005A, 3750ED1005B, 3750ED1005D, 3750ED1005E, 3751DD1002A, 3751DD1002B, 3751DD1005A, 3751DD1005B, AHB32983725, AHB32983726, AHB32983729, AHB32983734, AHB3, AHB32983762, MGR47998501
ManufacturerLG
Appliance TypeDishwasher
Part TypeUpper Dishrack Assembly
✅ Cross Reference Information
Current Part NumberAHB32983761
Replaces3750ED1005A, 3750ED1005B, 3750ED1005D, 3750ED1005E, 3751DD1002A, 3751DD1002B, 3751DD1005A, 3751DD1005B, AHB32983725, AHB32983726, AHB32983729, AHB32983734, AHB3, AHB32983762, MGR47998501
Common Symptoms
- Rack binds or does not slide smoothly despite apparently serviceable rollers, adjusters, and rails.
- Rack is visibly bent, damaged, or misshapen.
- Broken or missing tines no longer hold dishes securely.
- Rust or corrosion on the rack may stain dishes.
Check Before Replacing
- With the dishwasher empty, pull the upper rack fully forward and check for binding, uneven movement, or visible rack deformation.
- Inspect the rack frame and tines for breaks, bent sections, rust, or corrosion.
- Check that the rack rollers, adjusters, and support rails are seated and appear intact before attributing the issue to the rack assembly.
- After adjusting rack height, confirm both sides are at the same level and the spray arms rotate freely without contacting the rack or dishes.
- Verify that the rack can be pushed fully in and that the dishwasher door closes without interference.
Pro Tip
Before moving or removing the upper rack, empty it completely; after reinstalling or adjusting it, confirm both sides are level and the spray arms rotate freely.
Part Details
Part NumberAHB32983761
Part TypeUpper Dishrack Assembly
ManufacturerLG
Appliance TypeDishwasher
Primary FunctionHolds cups, glasses, bowls, small plates, and other suitable items securely in the dishwasher’s upper wash area while allowing water and spray-arm clearance.
Installation Notes
- Verify the appliance model before installation because the assembly is intended for select LG dishwashers.
- For snap-in rack-support designs, pull the empty rack forward to its stop, release the front supports from the rails, then release the rear supports as described in the applicable LG manual.
- To reinstall a snap-in rack, seat the rear supports behind the rear hooks first, pull the rack forward into position, then align and snap the front supports into the front hooks.
- Wear protective gloves and handle any screwdriver carefully when removing or replacing a rack identified by the manual as a snap-in service rack.
- After installation, check that the rack moves smoothly, both sides are aligned, the door closes, and the spray arms are unobstructed.
Verified Compatible Models
LDF6920BB, LDF6920ST, LDF6920WW, LDF7810BB, LDF7810ST, LDF7810WW, LDF7811BB, LDF7811ST, LDF7811WW, LDF7932BB, LDF7932ST, LDS5540BB, LDS5540ST, LDS5540WW, LDS5560ST
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
