Black AX cogged drive belt AX136 on white background
Black AX cogged drive belt AX136 on white background

HVAC & Equipment V-Belt B114, Replaces Timken BP114

Sale price
$26.72
Regular price
$34.99
You save
$8.27 (24%)

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →
BELT SLIPPING OR WORN?

HVAC & Equipment V-Belt B114, Fixes Belt Slipping

Wrapped classical B-section drive belt for HVAC, fans, blowers, pumps, conveyors, mixers and industrial machinery.

Part B114 117" 21/32" Top Width

The B114 V-belt transfers motor power to a compatible driven sheave. The B number is the primary classical belt designation. Match the original marking, section and manufacturer specifications before ordering.

Cross-Reference Information

Verified Classical NumbersB114, Timken B114, Timken BP114
Published Length InformationTimken published outside length: 117"; Uploaded catalog outside length: 117"
Cogged AlternativeNo BX crossover was added because this size was not found in the official BX size table used for this audit.
Belt ProfileB section, 21/32" × 7/16", 40°

Important: Manufacturer-published outside lengths can vary because the B designation is based on an industry classical length system and accurate belt measurement requires prescribed pulleys and tension. Match the complete part number rather than measuring a loose belt by hand.

Is This the Right Belt?

Primary Part NumberB114
Cross SectionClassical B section
Top Width21/32" / approximately 16.7 mm
Nominal Thickness7/16" / approximately 11.1 mm

Common Symptoms

  • Belt slips or squeals under load
  • Fan, blower, pump or conveyor runs slowly
  • Black belt dust appears around the sheaves
  • Belt is glazed, cracked, stretched or frayed

Check Before Replacing

  • Confirm the B-section profile and full original belt marking
  • Inspect sheaves for worn, polished, rusted or dished grooves
  • Check shaft alignment and bearing condition
  • Confirm the required service rating and tension specification
Pro Tip: A new belt can fail early when sheaves are worn, shafts are misaligned, bearings drag or tension is excessive. Correct the root cause before installation.

Installation Notes

  1. Disconnect and lock out electrical power.
  2. Relieve drive tension according to the equipment service manual.
  3. Do not pry the belt over a pulley; create enough slack for installation.
  4. Align the pulleys and set tension to the equipment manufacturer's specification.
  5. Rotate the drive by hand, reinstall guards, restore power and test operation.

Verified Compatible Equipment Models

No manufacturer-published model-level fitment was verified for this universal classical belt. Verified sources publish broad applications including mixers, pumps, conveyors, fans, blowers, compressors and general industrial drives. Match by exact belt designation and equipment specifications—not equipment category alone.

Search and crossover terms: B114, Timken B114, Timken BP114.

✅Compatibility & Cross Reference

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

What Customers Say About XPart Supply

4.72 ★ (261)
Verified

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps