C60 Industrial V-Belt — Dayco C60GL, Timken CP60

C60 wrapped classical C-section V-belt for compatible HVAC, fan, blower, pump, conveyor and industrial drives.

Verified Cross-Reference Information

• Exact references: C60, Dayco C60GL, Timken C60, Timken CP60
• Dayco lengths: 60-inch inside length; 62.35-inch datum length
• Timken outside circumference: 64.6 inches (1641 mm)
• Cogged alternative: CX60GL is a raw-edge cogged performance alternative, not identical wrapped construction.

Size & Construction

Classical C section, 7/8-inch top width and 17/32-inch height.

Common Symptoms

• Belt slips, squeals or chirps
• Reduced fan, blower, pump or conveyor speed
• Belt dust, cracking, glazing or fraying

Check Before Ordering

Match the complete C60 designation, C-section profile and the supplying manufacturer’s length specification. Inside, datum and outside measurements differ.

Installation Guidance

Have qualified personnel isolate equipment power, inspect alignment and sheaves, install without prying, set the specified tension, reinstall guards and test.

Verified Compatible Equipment Models

No reliable model-level fitment was verified. Match by exact belt designation, profile and manufacturer length specification.

FAQ

Is CX60GL identical to C60GL? No. CX60GL is a cogged performance alternative rather than identical wrapped construction.