Black AX cogged drive belt AX136 on white background
Black AX cogged drive belt AX136 on white background

HVAC & Equipment V-Belt C82, Replaces Dayco C82GL, Timken CP82

Sale price
$30.09
Regular price
$39.99
You save
$9.90 (25%)

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →
BELT SLIPPING OR WORN?

HVAC & Equipment V-Belt C82, Fixes Belt Slipping

Wrapped classical C-section drive belt for compressors, pumps, fans, blowers, conveyors and manufacturing equipment.

Part C82 7/8" Top Width 17/32" Height

The C82 V-belt transfers power in compatible classical C-section sheaves. Match the complete original belt marking and the equipment manufacturer's length system before ordering.

Cross-Reference Information

Verified Wrapped NumbersC82, Dayco C82GL, Timken C82, Timken CP82
Dayco Published Inside Length82"
Dayco Published Datum Length84.35"
Timken Published Outside Length86.3"

Length-system warning: Inside, datum and outside lengths are different measurements. Manufacturer tables can show different numeric lengths for the same C designation. Match the exact belt number and measurement system rather than comparing one loose-belt measurement.

Cogged Performance Alternative

Dayco CX82GL raw-edge cogged performance alternative. It is not identical wrapped construction; verify pulley diameter, duty rating and equipment requirements.

Is This the Right Belt?

Primary Part NumberC82
Cross SectionClassical C section
Top Width7/8" / approximately 22.2 mm
Nominal Height17/32" / approximately 13.5 mm

Common Symptoms

  • Belt slips, squeals or overheats under load
  • Driven equipment runs slowly or inconsistently
  • Black belt dust appears around the sheaves
  • Belt is cracked, glazed, stretched or frayed

Check Before Replacing

  • Confirm the classical C-section profile and complete original marking
  • Identify whether the old specification uses inside, datum or outside length
  • Inspect sheaves for wear, rust, glazing and groove damage
  • Check shaft alignment, bearings and required tension
Pro Tip: Large-section belts place substantial load on bearings and shafts. Excessive tension can shorten bearing life, while insufficient tension causes heat and slip.

Installation Notes

  1. Disconnect and lock out electrical power.
  2. Relieve belt tension according to the equipment service manual.
  3. Inspect and clean the sheaves before installation.
  4. Install without prying, align the sheaves and tension to specification.
  5. Rotate the drive by hand, reinstall guards, restore power and test operation.

Verified Compatible Equipment Models

No manufacturer-published model-level fitment was verified for this universal C-section belt. Official sources publish broad applications such as compressors, pumps, conveyors, fans and manufacturing equipment. Match by exact belt designation and drive specifications.

Search terms: C82, Dayco C82GL, Timken C82, Timken CP82; CX82GL.

✅Compatibility & Cross Reference

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

What Customers Say About XPart Supply

4.72 ★ (261)
Verified

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps