Cyclone Range Hoods Inc. NA940D Classic Collection 30-inch undermount range hood, stainless steel NA940DSS

Stainless-steel 30-inch undermount/under-cabinet range hood with a 680 CFM motor, dual vent openings, grease cups, and two-speed rocker-switch controls.

Is This the Right Part?

Common Symptoms

• Reduced ventilation performance
• Persistent cooking odors or moisture
• Grease accumulation associated with inadequate ventilation

Check Before Replacing

• Confirm the hood receives electrical power and that the fan operates on both available speed settings.
• Inspect the grease cups and internal fan area for heavy buildup that could restrict airflow.
• Check whether the duct route and opening match the hood's supported duct configuration.

Pro Tip

Part Details

Key Features

• 680 CFM motor
• 30-inch width
• Stainless-steel finish
• Undermount/under-cabinet installation
• Dual venting with round and rectangular openings
• 6-inch ducting specification shown on the product sheet for NA940DSS/NA940D models of this series

Installation Notes

• Disconnect electrical power before installation or service.
• The installation guide states that the minimum mounting height above the cooking surface should be 30 inches and the maximum should be 36 inches.
• The guide identifies 6-inch round and 3 × 10-inch rectangular vent dimensions and states that an adapter may be used when duct shapes do not match.
• Do not reduce the duct size below the hood's required ductwork; the guide states that doing so voids the warranty.