Samsung Refrigerator Not Dispensing Water or Making Ice? Water Inlet Valve DA62-01477A – Fix It Fast

If your Samsung refrigerator has stopped dispensing water, the ice maker has stopped working, or you notice water leaking behind or beneath the refrigerator, the water inlet valve is the most likely failed component. In most Samsung refrigerators, the water inlet valve is a dual-solenoid electrically controlled valve that opens to supply water to both the ice maker and the door dispenser — when either solenoid fails or the valve body cracks, one or both water functions stop working entirely. ⚡ One of the most common failure points on Samsung French door and side-by-side refrigerators with water and ice dispensers. Part DA62-01477A is the genuine OEM replacement water inlet valve that restores full water and ice dispenser function immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and cooling functions are normal
• ✔ Household water supply line to the refrigerator is connected and water pressure is adequate (minimum 20 PSI)
• ✔ Water filter has been replaced recently and is not clogged or bypassed incorrectly
• ✔ ONLY problem is no water from dispenser, no ice production, or water leaking from the valve area at the back of the refrigerator

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• No water from door dispenser — dispenser solenoid failed or valve body cracked
• Ice maker stopped producing ice — ice maker solenoid failed
• Water dispenses slowly or in a weak stream — valve partially blocked or solenoid weakening
• Water leaking from behind the refrigerator — valve body cracked or fitting failed
• Humming noise from back of refrigerator when dispenser is pressed — solenoid energizing but valve not opening
• Ice maker fills with too much or too little water — solenoid not regulating correctly

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing the DA62-01477A water inlet valve restores full water and ice dispenser function immediately.

📦 Part Details

• Part Number: DA62-01477A
• Type: Refrigerator Dual-Solenoid Water Inlet Valve — OEM Samsung
• Solenoids: Dual — one for ice maker, one for door water dispenser
• Brands: Samsung
• Options: OEM New, XPart aftermarket new, OEM Used (tested)

⚙️ Installation

Skill Level: Moderate — 20–35 minutes. Disconnect power and shut off the water supply before servicing. Pull the refrigerator away from the wall to access the valve at the rear lower panel. Disconnect the water supply line, unplug the wiring harness connectors from both solenoids, remove the mounting screws, and install the new DA62-01477A in reverse order. Restore water supply, check all fittings for leaks, restore power, and run a dispenser test cycle before pushing the refrigerator back into position.

✓ Compatible Models

Confirmed compatible with select Samsung French door and side-by-side refrigerator models with dual water/ice dispenser systems. Contact us to verify your model number before ordering.

❓ Frequently Asked Questions

How do I know if the valve or the water filter is causing no water?
Bypass the water filter by installing the filter bypass plug and test the dispenser. If water flows with the bypass in place, the filter is clogged or incorrectly installed. If no water flows with the bypass, the inlet valve is the likely cause.

What is the difference between OEM, XPart, and Used options?
OEM New is the original Samsung factory valve. XPart is a premium aftermarket alternative engineered to meet or exceed OEM specs at a lower price. Used/OEM is a tested pull from a working appliance — ideal for budget repairs where the appliance has limited remaining life. XPart and Used parts are not affiliated with Samsung.

✓ Model-Specific Repair Pages

💡 Pro Tip