OEM & PREMIUM XPART OPTIONS AVAILABLE
Refrigerator DA82-01415A, Replaces DA82 Excessive Frost Service Kit
If your Samsung refrigerator is building up excessive frost on the evaporator, walls, or door gasket area — or if you're seeing water pooling inside the fridge — this is the kit designed to fix it. The DA82-01415A Excessive Frost Service Kit includes all the components needed to locate and eliminate the source of frost accumulation and leaks in one repair visit. Confirm your model number below before ordering.
Part DA82-01415A
Replaces DA82, 01415A, 3436781
Refrigerator DA82-01415A
Is This the Right Part?
Part NumberDA82-01415A
ReplacesDA82, 01415A, 3436781
Appliance TypeRefrigerator
Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.
- Excessive frost or ice buildup inside the refrigerator or freezer compartment
- Water pooling at the bottom of the fridge or leaking onto the floor
- Food freezing in the refrigerator section
- Refrigerator running constantly or cycling too frequently
- Visible frost on evaporator coils or back wall panel
- Warm spots or inconsistent temperatures despite compressor running
- Part Number: DA82-01415A
- Replaces: 3436781
- Kit Includes: All components required to diagnose and repair excessive frost and leak sources
- Vendor Options: OEM Samsung or Premium XPart aftermarket
- Compatible Models: REFUS/SVC
- Ships From: Ontario, Canada
- Skill Level: Intermediate — comfort with pulling refrigerator panels and accessing the evaporator section required
- Always disconnect power before beginning any repair
- Allow full defrost cycle to complete before reassembly to ensure all ice is cleared
- Check door gasket seating after repair — a poorly seated gasket is a common secondary cause of frost re-accumulation
- Confirm drain tube is clear before closing up — a blocked drain will cause repeat frost issues
💡 Pro Tip — Don't Let Frost Come Back:
While you have the panels off, inspect the evaporator drain tube and drain heater. A clogged or failed drain heater is the #1 reason frost returns after a service kit repair. Replacing the drain heater at the same time saves a second labour call and keeps the repair complete in one visit.
While you have the panels off, inspect the evaporator drain tube and drain heater. A clogged or failed drain heater is the #1 reason frost returns after a service kit repair. Replacing the drain heater at the same time saves a second labour call and keeps the repair complete in one visit.
Part Details
ConditionOEM / XPart
Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
