Samsung Refrigerator Ice Maker Assembly DA97-11092B, Fixes Little or no ice production
Genuine Samsung refrigerator in-door ice maker assembly. The assembly includes the ice mold and control device; manufacturer/distributor nomenclature identifies it as "Assy Ice Maker; Ggh-Pjt, 115V, 60Hz."
Genuine Samsung refrigerator in-door ice maker assembly. The assembly includes the ice mold and control device; manufacturer/distributor nomenclature identifies it as "Assy Ice Maker; Ggh-Pjt, 115V, 60Hz."
Is This the Right Part?
Common Symptoms
- Ice maker does not cycle or eject ice
- Reduced ice production
- Small or incompletely filled ice cubes
- Ice maker or ice bucket becomes blocked by ice
- Water leaks or freezes around the ice-maker assembly
Check Before Replacing
- Confirm the ice maker is enabled and the in-door ice bucket is fully seated and clear of obstructions.
- Use the Samsung ice-maker Test button if accessible; observe whether the assembly cycles and whether water enters at the end of the test.
- Check that the refrigerator water supply valve is fully open and the supply line is not kinked.
- If cubes are small, check water flow or dispenser output and consider whether the water filter is restricting flow; Samsung specifies at least 20 psi for affected tests.
- Inspect the assembly and surrounding area for visible damage, frost, or leakage without removing covers or applying heat.
Pro Tip
Part Details
Key Features
- Genuine Samsung refrigerator ice-maker assembly
- Designed for selected Samsung in-door refrigerator ice makers
- Manufacturer nomenclature identifies the assembly as 115 V, 60 Hz
- Reported production capacity is up to approximately 2.7 kg of ice per day, depending on refrigerator conditions
- Reported ejection interval is approximately 38 minutes until the storage bin is full, with timing varying by temperature settings
Installation Notes
- Disconnect refrigerator power before servicing.
- Remove the ice bucket and any components that obstruct access, following the refrigerator’s service or owner documentation.
- Disconnect the old assembly’s electrical and water connections only after power and water have been safely isolated.
- Mount the replacement assembly in the original location and reconnect the electrical and water connections securely.
- Reinstall the ice bucket and any removed components, restore power and water, and verify operation with the model-appropriate test procedure.
- Do not force a frozen bucket or use a hair dryer or other heat source to defrost the ice maker.
Verified Compatible Models
RS265TDBP, RS265TDRS/XAA-0000, RS265TDRS/XAA-0001, RS265TDRS/XAA-0002, RS265TDRS/XAA-0003, RS265TDRSXAC, RS265TDWP/XAA-0000, RS265TDWP/XAA-0001, RS267TDBP/XAA-0001, RS267TDBP/XAA-0002, RS267TDBP/XAC-0002, RS267TDBPXAC, RS267TDRSXAC, RS267TDWP/XAA-0002, RS267TDWP/XAA-IN01, RS267TDWPXAC, RS267TDWP/XAA-0001, RSG257AABP/XAA-0003, RSG257AABP/XAA-0004, RSG257AABP/XAA-0005, RSG257AARS/XAA-0003, RSG257AARS/XAA-0004, RSG257AARS/XAA-0005, RSG257AAWP/XAA-0003, RSG257AAWP/XAA-0004, RSG257AAWP/XAA-0005, RSG307AABPXAA, RSG307AARSXAA, RSG309AARSXAA, BSG259AABP/KEN-0001, BSG259AARS/KEN-0001, RS265TDBP/XAA, RS265TDPN/XAA, RS265TDRS/XAA, RS265TDWP/XAA, RS267TDBP/XAA, RS267TDPN/XAA, RS267TDRS/XAA, RS267TDWP/XAA, RSG257AABP/XAA, RSG257AARS/XAA, RSG257AAWP/XAA, RSG307AAWP/XAA
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
