Samsung Washer Door Lock Switch DC34-00026B

Samsung washer door lock switch; locks the washer door to prevent opening during wash and spin cycles. Documented specification in Samsung parts documentation: AC120V, 16A solenoid door-lock switch.

Is This the Right Part?

Common Symptoms

• Door-lock indicator does not appear or continues flashing after the door is closed.
• Washer will not begin a cycle even though the controls are powered.
• Washer may stop during a cycle with the door remaining locked.
• Door-lock-related error messages may occur, although these can also result from door alignment, residual water, wiring, or control faults.

Check Before Replacing

• Confirm the selected cycle has ended and that the washer has fully drained; Samsung notes that the door may remain locked while water is detected inside.
• Verify that Child Lock is not engaged and allow the washer a short delay to release the lock after draining or cancellation.
• With power disconnected, visually inspect the door strike, latch opening, and lock housing for visible damage, obstruction, lint, or misalignment; do not force the door.
• Check that the door closes squarely and that the latch enters the lock opening without excessive play or visible interference.
• Before condemning the switch, have a qualified technician check the door-lock wiring, connector seating, and control-side circuit according to the washer service documentation.

Pro Tip

Part Details

Key Features

• Genuine Samsung washer door-lock switch.
• Solenoid-operated door-lock component.
• Prior Samsung parts documentation specifies AC120V, 16A, solenoid.
• Designed to prevent the door from opening during wash and spin cycles.
• Exact component identity is DC34-00026B; verify the complete washer model before ordering.

Installation Notes

• Disconnect electrical power before installation.
• Do not force open a locked door; drain the washer and follow the appliance-specific service procedure if water remains inside.
• Wear suitable work gloves when handling the lock assembly or washer cabinet.
• Confirm that the replacement part number and connector arrangement match the original part and the washer model.
• After installation, restore power and verify that the door closes, locks, and releases normally before returning the washer to service.

Verified Compatible Models

WW22K6800AW/A2

Fitment reminder: Match the complete model number including suffix and revision before ordering.