Samsung Washer Housing-drawer(L) DC61-01167A, Fixes Detergent or additives are not dispensing properly
Genuine Samsung washer dispenser-drawer housing. It houses the detergent, fabric-softener, and bleach compartments.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Washer dispenser is not working properly.
- Water does not enter the dispenser to flush detergent into the tub on applicable models where the inlet valve is integrated with the dispenser housing.
Check Before Replacing
- Disconnect power before inspection. Remove the dispenser drawer and inspect the housing’s accessible channels and compartments for detergent or softener residue, blockage, cracks, or obvious damage.
- Confirm the dispenser drawer is fully seated and moves normally in the housing.
- During the appropriate portion of a normal cycle, observe whether water enters and flushes the dispenser; do not reach into the machine or disassemble live electrical components.
- If water does not enter the dispenser, check the washer’s water supply and model-specific inlet-valve configuration before attributing the issue to the housing.
Pro Tip
Part Details
Installation Notes
- Disconnect electrical power and shut off the washer water supply before servicing the dispenser area.
- Use the model-specific service instructions, because water-hose and dispenser-housing access can vary by washer model.
- After reassembly and restoring the water supply, run a supervised rinse or test cycle and check the dispenser area for proper water flow and leaks.
Verified Compatible Models
WF206BNW/XAA, WF209ANW/XAA, WF218ANB/XAA, WF218ANB/XAC, WF218ANS/XAC, WF218ANW/XAA, WF218ANW/XAC, WF219ANB/XAA, WF219ANW/XAA, WF229ANG/XAC
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
