Dryer Taking Too Long or Overheating? Lint Filter DC61-05489A – Restore Airflow & Eliminate Fire Risk Fast
If your Samsung dryer is taking multiple cycles to dry a load, running hot, or shutting off mid-cycle — a clogged or damaged lint filter is the first thing to check. In most Samsung front-load and top-load dryers, the lint filter traps debris from every load to maintain proper airflow through the drum and exhaust system. When it becomes damaged, warped, or too clogged to clean effectively, airflow is restricted — causing longer dry times, overheating, and in worst cases, a fire hazard. ⚡ One of the most common maintenance replacements across Samsung's dryer lineup. Part DC61-05489A is the genuine OEM replacement that restores full airflow, protects your heating element, and keeps your dryer running safely and efficiently.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dryer powers on and drum rotates normally
- ✔ Exhaust vent and ductwork are clear of blockages
- ✔ Lint filter is visibly damaged, warped, torn, or no longer seals properly
- ✔ ONLY problem is restricted airflow, long dry times, or overheating
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Clothes still damp after a full drying cycle
- Dryer runs hot or shuts off before cycle completes
- Lint filter visibly torn, bent, or no longer fits snugly in housing
- Burning smell during operation — lint bypassing the filter
✔ If these symptoms match, the lint filter is the most likely cause of restricted airflow in the system.
✔ In most cases, replacing this lint filter immediately restores normal drying performance and eliminates overheating.
📦 Part Details
- Part Number: DC61-05489A
- Type: Dryer Lint Filter / Lint Screen Assembly
- Replaces: DC61-05489A (OEM direct replacement)
- Brands: Samsung
While the lint filter is out, inspect the lint filter housing and duct seal for lint buildup or cracks that allow bypass. Also check your exhaust duct — a clogged duct is the #1 reason a new lint filter doesn't fully solve long dry times. Clean the full exhaust path every 12–18 months.
⚙️ Installation
Skill Level: EASY — 5 minutes, no tools required. Disconnect power before servicing. Pull the existing lint filter straight up and out of the housing slot on the top of the dryer door opening. Slide the new DC61-05489A filter into the housing until it seats flush and secure. Restore power and run a test cycle.
✓ Compatible Models
Confirmed compatible with DVE45T6000V/A3, DVG45T6000V/A3, DVG46BB6700DA3, DVG53BB8900TA3, DVE46BB6700DA3, DVE53BB8900DA3, DVE53BB8700TA3, WH53DBH700GFA3, WH46DBH100GWA3, DVE45T6020W/A3, DVG45B6300C/A3, DVE51CG8000VA3, DVE45A6400V/A3, DV45K6500EV/AC, DVE50BG8300EA3, DV45K6500EW/A3 plus additional Samsung electric and gas dryer models. Contact us to verify your model number before ordering.
💡 Pro Tip
Samsung recommends cleaning the lint filter after every load, but the filter mesh itself degrades over time from heat cycling and cleaning. If your filter is more than 3–5 years old or shows any mesh damage, proactive replacement is cheaper than a service call for an overheated heating element or thermal fuse. At under $100, it's the best dryer maintenance investment you can make.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
