Dryer Drum Noisy or Not Spinning? Samsung Drum DC97-23529A — Fix Tumbling Failure Fast
If your Samsung dryer is making loud thumping, scraping, or squealing noises during a cycle — or the drum has stopped rotating entirely — the dryer drum assembly is the most likely cause. In Samsung dryers, the drum (DC97-23529A) is the large rotating cylinder that tumbles your clothes through heated air. When it cracks, warps, or its support glides wear through, it creates noise, uneven tumbling, or a complete failure to spin. ⚡ Common wear-out point in high-cycle Samsung dryers — especially in households with heavy laundry loads. Part DC97-23529A is the genuine Samsung OEM drum assembly that restores smooth, quiet, full-capacity drying performance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ QUALIFIER 1 — dryer powers on and heats normally
- ✔ QUALIFIER 2 — drive motor and belt have been inspected and confirmed OK
- ✔ QUALIFIER 3 — drum glides, felt seal, and rear bearing have been checked
- ✔ ONLY problem is loud noise during tumbling, drum wobble, visible cracks, or drum not rotating
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Loud thumping, banging, or scraping noise during the drying cycle
- Drum wobbles or feels unbalanced while spinning
- Visible cracks, dents, or deformation on the drum surface
- Drum stops rotating mid-cycle or won't spin at all
- Clothes coming out with scorch marks or uneven drying
✔ If these symptoms match, the drum assembly is the most likely failed component in the system.
✔ In most cases, replacing the DC97-23529A drum restores quiet, even drying performance immediately.
📦 Part Details
- Part Number: DC97-23529A
- Type: Dryer Drum Assembly — Certified Pre-Owned OEM
- Replaces: DC97-17345A, DC97-05280W, DC97-05280H
- OEM Brand: Samsung
- Condition: Certified Pre-Owned — inspected and verified functional
- Weight: ~75 lbs — oversized item, freight shipping may apply
While the drum is out, replace the drum support rollers, felt drum seal, and drive belt — these wear components are inexpensive and almost always need replacement at the same mileage as the drum. Doing them together eliminates a second disassembly and saves significant labour time.
⚙️ Installation
Skill Level: ADVANCED — 60–120 minutes. Disconnect power before servicing. Full dryer disassembly is required — remove the front panel, bulkhead, and drive belt to extract the old drum. Transfer any reusable glides or felt seal to the new drum if not replacing them. Reinstall in reverse order, ensuring the belt is correctly routed around the motor pulley and idler. A second person is strongly recommended for drum handling due to the size and weight.
✓ Compatible Models
Confirmed compatible with WA45H7000AW/A2, WA45H7200AW/A2, WA50F9A6DSW/A2, WA48H7400AW/A2, WA52J8700AP/A2, WA52J8700AW/A2, WA45K7600AW/A2, WA50K8600AV/A2, plus additional Samsung models. Contact us to verify your model number before ordering.
💡 Pro Tip
A drum swap is the most labour-intensive repair on a Samsung dryer. Since you're already fully disassembled, add the drum roller kit and felt seal to your order — parts cost under $30 combined, but the labour to go back in a second time costs far more. Technicians always do the full kit on drum replacements. Your future self will thank you.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
