Dishwasher Not Draining or Motor Dead? The Pump and Motor Assembly Has Failed — Fix It with DD93-01010A
When the pump and motor assembly fails in your Samsung dishwasher, water sits at the bottom of the tub, dishes come out dirty, and the machine may stop mid-cycle or throw a drain error. This assembly drives both the wash circulation and the drain function — when it goes, the entire dishwasher goes with it. The genuine OEM DD93-01010A restores full wash and drain performance with a direct factory-fit replacement.
Symptoms of a Failed Pump and Motor Assembly
- Standing water at the bottom of the dishwasher after a cycle
- Dishwasher not draining — drain error code displayed
- Weak or no water circulation during the wash cycle
- Dishes coming out dirty, greasy, or with food residue
- Loud grinding, humming, or buzzing noise during operation
- Dishwasher stops mid-cycle and won’t restart
- Motor runs but no water movement detected
Part Details
- OEM Part Number: DD93-01010A
- Brand: Samsung
- Type: Dishwasher Pump and Motor Assembly — Genuine OEM
- Condition: New
- Compatible Models: DW80J9945US/AA, DW80J9945US/AC, DW80J7550UG/AA, DW80J7550UG/AC, DW80J7550US/AA, DW80J7550US/AC, DW80J7550UW/AA, DW80J7550UW/AC, DW80H9970US/AA, DW80H9970US/AC, DW80H9950US/AA, DW80H9940US/AA, DW80H9930MO/AA, DW80H9930US/AA
Installation Notes
- Skill Level: Intermediate — requires tipping the dishwasher on its side to access the pump from below
- Safety First: Disconnect power and turn off the water supply before beginning any disassembly
- Drain First: Remove all standing water from the tub before tipping the unit — use towels to protect the floor
- Connections: Photograph all wire harness and hose connections before disconnecting; the pump has both electrical and plumbing connections
- Torque: Hand-tighten hose clamps and mounting screws — overtightening can crack the pump housing
Compatible Models
DW80J9945US/AA, DW80J9945US/AC, DW80J7550UG/AA, DW80J7550UG/AC, DW80J7550US/AA, DW80J7550US/AC, DW80J7550UW/AA, DW80J7550UW/AC, DW80H9970US/AA, DW80H9970US/AC, DW80H9950US/AA, DW80H9940US/AA, DW80H9930MO/AA, DW80H9930US/AA
Verify your model number (found on the door jamb label) before ordering. Contact us if you need help confirming compatibility.
Before committing to a pump and motor replacement, spend 5 minutes checking the drain hose for kinks or blockages and cleaning the dishwasher filter assembly — a clogged filter or kinked hose causes identical standing-water symptoms at zero cost. If the filter is clear and the hose is unobstructed but the motor still won’t run or drain, the pump assembly is the confirmed culprit. Also inspect the drain hose check valve while you have the pump out — a failed check valve causes water to siphon back into the tub after draining.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
