OVEN BURNER FAILS TO IGNITE OR TAKES EXCESSIVELY LONG TO IGNITE
Samsung Range Hot Surface Igniter / Oven Burner Igniter DE81-07046A, Fixes Oven burner fails to ignite or takes excessively long to ignite
OEM hot-surface igniter that heats to ignite the gas oven burner. It is used for bake and broil ignition and may be listed for certain Dacor and Samsung range models.
Part DE81-07046AReplaces 82473Samsung
Guaranteed to Fit β or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberDE81-07046A
Replaces82473
ManufacturerSamsung
Appliance TypeRange
Part TypeHot Surface Igniter / Oven Burner Igniter
β Cross Reference Information
Current Part NumberDE81-07046A
Replaces82473
Common Symptoms
- Oven does not heat during bake or broil
- Delayed or inconsistent gas ignition
- Igniter glows but the burner does not light
- Igniter does not glow
- Bake or broil function fails while the other may continue operating
Check Before Replacing
- With the appliance cool and power disconnected, visually inspect the igniter and wiring for cracks, damage, or loose connections.
- During a normal ignition call, observe whether the igniter glows; do not touch the igniter or defeat safety controls.
- If the igniter glows for an extended period without burner ignition, treat the igniter as a possible cause but also consider the gas valve, wiring, and control circuit.
- With power disconnected, a qualified person may perform a continuity check of the igniter using the appliance service documentation; lack of continuity indicates a failed igniter, but continuity alone does not prove proper operating strength.
- If gas odor is present, stop testing, avoid flames or electrical switches, ventilate if safe, and contact the gas utility or a qualified appliance technician.
Pro Tip
A visibly glowing igniter can still be too weak to open the oven safety valve; an igniter that glows for more than about 90 seconds without ignition is a useful failure clue, but it is not by itself a conclusive diagnosis.
Part Details
Part NumberDE81-07046A
Part TypeHot Surface Igniter / Oven Burner Igniter
ManufacturerSamsung
Appliance TypeRange
Primary FunctionHeats to ignite the gas oven burner during bake and broil operation; the igniter also draws current through the oven safety valve as part of the ignition sequence.
Installation Notes
- Disconnect electrical power and allow the oven to cool completely before service.
- Shut off the gas supply if the appliance service procedure requires access to the gas burner or ignition assembly.
- Use the appliance-specific service documentation to access and secure the igniter; exact mounting and wiring details can vary by model.
- Reconnect the wiring exactly as found and inspect connections before restoring power or gas.
- After installation, verify ignition operation without bypassing safety controls; stop if gas accumulates or ignition is abnormal.
Verified Compatible Models
EDR30S06, ER30G, ER30GI, ER36G, ER36GI, HGPR30S/NG, HGPR36C/LP/H, HGPR36C/NG, HGPR36CA/NG, HGPR36CD/NG, HGPR36CW/NG, HGPR48C/LP/H, HGPR48CA/NG, HGPR48CD/NG, HGPR48CR/NG
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
MonβFri 9β―AMβ5β―PM β’ Sat 9β―AMβ1β―PM
