Samsung Microwave Magnetron high-limit thermostat assembly DE96-00912C

Samsung OEM microwave thermostat assembly used as a high-limit/magnetron overheat safety thermostat; it interrupts heating when an overtemperature condition occurs.

Is This the Right Part?

Common Symptoms

• Microwave operates but does not heat after an overheat event
• Microwave stops during a cooking cycle and may resume after cooling
• Microwave may appear completely inoperative if the thermostat is open

Check Before Replacing

• Confirm the microwave has adequate ventilation and that external air paths are not blocked.
• Note whether the symptom occurs only after the microwave has been operating and warmed up.
• After disconnecting power and allowing the appliance to cool, inspect the thermostat assembly and its wiring for visible damage or loose connections.
• A qualified microwave technician may check thermostat continuity with power disconnected; an open reading can indicate a failed thermostat, but other faults can produce the same symptom.
• Do not remove the microwave cabinet or test energized high-voltage circuits unless qualified to service microwave ovens.

Pro Tip

Part Details

Key Features

• Genuine Samsung thermostat assembly for microwave applications.
• Assembly includes the thermostat and mounting bracket.
• Samsung parts documentation identifies the assembly as DE96-00912C and the included thermostat as DE47-20009A.
• The associated thermostat specification is listed as 125/250 V, 15/7.5 A, 150, 60.
• Designed as a thermal overtemperature safety device rather than a temperature-control user interface.

Installation Notes

• Disconnect the microwave from electrical power before inspection or replacement.
• Allow the appliance and thermostat area to cool before handling the assembly.
• Use the exact DE96-00912C assembly and preserve the original mounting position and wiring arrangement.
• Microwave ovens contain hazardous high-voltage circuits even when unplugged; cabinet removal and internal service should be performed by a qualified technician.
• After installation, verify operation according to the appliance service documentation and confirm that ventilation is unobstructed.

Verified Compatible Models

DMO30U970SS, DMO30U970SS/DA, MC11K7035CG, MC11K7035CG/AA, MC11K7035CG/AA-00, MC11K7035CG/AA-01, MC11K7035CG/AA-02, MC17J8000CG, MC17J8000CG/AA, MC17J8000CG/AA-00, MC17J8000CG/AA-01, MC17J8000CS, MC17J8000CS/AA, MC17J8000CS/AA-00, MC17J8000CS/AA-01, MC17T8000CG, MC17T8000CG/AA, MC17T8000CS, MC17T8000CS/AA, MC17T8000CS/AA-00, MC17T8000CS/AA-01, ME11A7510DG, ME11A7510DG/AA, ME11A7510DS, ME11A7510DS/AA, ME11A7510DS/AA-00, ME11A7710DG, ME11A7710DG/AA, ME11A7710DG/AA-00, ME11A7710DS, ME11A7710DS/AA, ME11A7710DS/AA-00, ME11CB751012AA, ME11CB751012AC, ME11F7510MT/AA, ME90H1780RAA, MG14H3020CM, MG14H3020CM/AA, MG14H3020CM/AA-00, MG14J3020CM, MS19DG8500MTAA, MS19DG8500SRAA, MS19DG8500SRAC, MS19M8000AG/AA, MS19M8000AS, MS19M8000AS/AA, MS19M8000AS/AA-00, MS19M8020TG, MS19M8020TG/AA, MS19N7000AS/AA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.