Samsung Range Burner Not Heating? Radiant Element DG47-00023A – Fix 6-Inch Surface Burner Failure Fast

A dead or inconsistent 6-inch surface burner is one of the most common electric range failures in Samsung cooktops. In most Samsung electric ranges, this is caused by a burned-out or degraded radiant surface element. When it fails, the burner stops responding entirely or heats unevenly — making precise simmering and searing impossible and leaving you working around a dead zone on your cooktop. ⚡ Common failure point in Samsung electric ranges after extended high-heat use. Part DG47-00023A is the genuine OEM 6-inch, 1200W replacement element that restores full, even heating performance immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and other burners work normally
• ✔ Oven and controls function correctly — only this surface element is affected
• ✔ Electrical supply confirmed OK — no tripped breaker or blown fuse
• ✔ The burner socket and wiring harness are undamaged
• ✔ ONLY problem is this specific 6-inch burner not heating or heating unevenly

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• 6-inch burner not heating at all — most common, what customers Google
• Burner heats unevenly — hot spots and cold spots across the element
• Burner glows red on one side only
• Burner cycles off unexpectedly during cooking
• Visible burn marks, cracks, or blistering on the element surface
• Range display shows error code related to surface element or heating circuit

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this radiant surface element restores full, even heating immediately.

📦 Part Details

• Part Number: DG47-00023A
• Type: 6-Inch Radiant Surface Element — 1200W at 240V
• Replaces: OEM direct-fit Samsung surface element — DG47-00023A (no modification required)
• Brands: Samsung
• Design: Serpentine coil radiant element for uniform heat distribution across the 6-inch cooking zone

⚙️ Installation

Skill Level: EASY — 15–25 minutes. Disconnect the range from power at the breaker before starting — do not rely on the surface controls alone. Lift the cooktop or access the element from above depending on your model, disconnect the wiring harness from the element terminals, remove the mounting hardware, and swap in the new DG47-00023A. Ensure all terminal connections are fully seated and secure before restoring power and testing all heat settings on this burner.

✓ Compatible Models

Confirmed compatible with Samsung electric ranges equipped with the DG47-00023A 6-inch radiant surface element. Contact us to verify your model number before ordering.

💡 Pro Tip

Part Hubs: DG47-00023A Part Hub, DG47-00022A Dual Burner Hub, Samsung Range Parts