Samsung Range Rocking or Uneven? Leveling Leg DG61-00294A – Fix Wobbly Range Fast
A rocking, wobbling, or uneven Samsung range is almost always caused by a missing, broken, or seized leveling leg — not a floor or installation problem. In most Samsung freestanding ranges, each corner has an adjustable leveling leg that compensates for uneven floors and keeps the appliance stable during use. When a leg breaks, strips, or goes missing, the range rocks during cooking, burner grates sit unevenly, and oven heat distribution is affected — and the range can shift dangerously on hard flooring. ⚡ Common failure point in Samsung freestanding ranges, especially after moving or flooring changes. Part DG61-00294A is the genuine OEM Samsung replacement leveling leg that restores full stability and proper leveling adjustment to your range.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Range powers on and all burners/elements work normally
- ✔ Oven heats and functions correctly
- ✔ Floor surface is confirmed level or near-level
- ✔ ONLY problem is rocking, wobbling, or inability to level the range at one or more corners
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Range rocks or wobbles during cooking
- One corner of the range sits lower than the others
- Leveling leg missing, broken, or stripped and won’t adjust
- Burner grates or cooktop surface visibly tilted
- Range shifted or moved and won’t re-level properly
✔ If these symptoms match, the leveling leg is the most likely cause — a direct swap restores full stability.
✔ In most cases, replacing the DG61-00294A leg and re-adjusting takes under 10 minutes with no tools required.
📦 Part Details
- Part Number: DG61-00294A
- Type: Range Leveling Leg — adjustable foot for freestanding Samsung ranges
- OEM: Genuine Samsung replacement part
- Also Known As: DG61-00294A, Samsung range foot, range leveling foot
- Brands: Samsung
If one leg is broken or stripped, inspect all four corners before reassembling. Leveling legs wear at the same rate — replacing all four at once ensures even leveling and prevents a second service call when another leg fails shortly after.
⚙️ Installation
Skill Level: EASY — 5 to 10 minutes. Disconnect power before moving the appliance. Tilt or carefully lift the front of the range to access the leg socket, thread the new DG61-00294A leg into the corner bracket by hand, then lower the range and adjust the leg height until the range sits level on all four corners. Use a spirit level on the cooktop surface to confirm.
✓ Compatible Models
Confirmed compatible with FER300SB/XAA, NE595R0ABSR/AA, NE59J7630SB/AA, NE59J7630SG/AA, NE59J7630SS/AA, NE59J7630SW/AA, NE59J3421SS/AA, NE59J7750WS/AA, NE59J7850WG/AA, NE59J7850WS/AA, NE59K3321SS/AC, NE59J3420SB/AA, NE59J3420SS/AA, NE59J3420SW/AA, NE59M6850SG/AA, NE59M6850SS/AA, NE59M4320SW/AA, NE59M4320SS/AA, NE59M4320SG/AA, NE59M4320SB/AA plus additional Samsung range models. Contact us to verify your model number before ordering.
💡 Pro Tip
Leveling legs on Samsung ranges are sold individually, but they wear as a set. If one has broken or stripped, the others are likely close behind — especially on ranges that have been moved or reinstalled. Ordering four at once costs less than a second service call and guarantees a perfectly stable, level range from all corners.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
