LG Electronics Washer Noise Filter Assembly EAM60991315 – Superseded by EAM60991301

Is This the Right Part?

Common Symptoms

• Intermittent loss of power during a cycle
• Washer stops unexpectedly or fails to start
• Electrical/control-related operation problems after a power event
• Visible scorching, melting, or damage at the filter or its wiring

Check Before Replacing

• Disconnect the washer from electrical power before inspection or service.
• Confirm the wall outlet and power cord supply power before identifying the filter as the cause.
• Visually inspect the filter assembly and nearby wiring for scorching, melting, cracked housing, moisture, or loose connections.
• Check that the filter’s wire harness connections are fully seated and show no visible damage.
• If qualified to perform electrical testing, check filter continuity with the washer fully disconnected from power; do not test energized wiring.
• Do not bypass or short the noise filter as a diagnostic test.

Pro Tip

Part Details

Installation Notes

• Disconnect the washer from electrical power and close or disconnect water supplies before service.
• Locate the filter according to the washer’s service information or parts diagram; location varies by model.
• Photograph or label the wire-harness arrangement before disconnecting the old assembly.
• Transfer the wiring only to the matching terminals on the replacement part; do not alter or bypass the circuit.
• Secure the replacement assembly and reconnect harnesses as originally installed, then reinstall any removed panels before restoring power.
• LG recommends using an authorized service center for appliance repair when appropriate.

Verified Compatible Models

79641303610, 79641982410, WM1388HW, WM3270CW, WM3400CW, WM3570HVA/01, WM3670HVA, WM3670HWA, WM3700HWA, WM3770HVA, WM3770HWA, WM4370HKA, WM4370HWA, WM8100HVA, WM8100HWA, WM3770HVA/01, WM3700HVA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.