LG Range Oven relay control board EBR52349704, Replaces EBR52349702

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Bake or broil heating may not operate when commanded.
• Oven may overheat or continue heating if a relay contacts remain closed.
• A relay-related fault condition may occur, including an oven-too-hot condition on applicable LG models.
• The oven light or other electrically supplied oven function may lose power if the board’s power-supply circuitry fails.

Check Before Replacing

• Disconnect electrical power to the range before accessing or testing the board.
• With power disconnected, inspect the board, relay area, connectors, and wiring for visible burning, loose connections, or damage.
• For applicable LG service procedures, test the relevant heater-relay-to-line resistance with power off: infinite resistance is identified as normal, while continuity is identified as abnormal.
• Verify the appliance model and board markings before replacement; do not condemn the relay board solely from a no-heat symptom because wiring, the heating component, sensor, or main control can produce similar symptoms.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before beginning the repair.
• Use protective work gloves when handling the range and circuit board.
• Transfer connectors one at a time and confirm each connection against the original board and the model-specific service documentation.
• Do not reuse the board if there is visible heat, arc, or connector damage without identifying and correcting the underlying wiring or load problem.

Verified Compatible Models

FG4331EB, FG4331ES, LRG3083ST, LRG3083ST/00, LRG3085ST, LRG3085ST/00, LRG3095SB, LRG3095SB/00, LRG3095SB/01, LRG3095ST, LRG3095ST/00, LRG3095ST/01, LRG3095ST/02, LRG3095SW, LRG3095SW/00, LRG3095SW/01, LRG3095SW/02, LSRG307ST

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.