THE APPLIANCE CANNOT CONNECT TO OR REMAIN CONNECTED TO LG THINQ OVER WI‑FI
LG Dishwasher Module PCB Assembly / Wi-Fi PCB Assembly EBR82056913, Fixes The appliance cannot connect to or remain connected to LG ThinQ over Wi‑Fi
LG Wi-Fi module PCB assembly. Technical documentation identifies it as an LGIT 5th-generation Wi-Fi modem using the LCW-003/QCA4010 platform. The part is also cataloged for selected LG appliances in other categories, including refrigerators, air conditioners, ranges, wall ovens, and range hoods.
Part EBR82056913Replaces EBR82056901, EBR82056903, EBR82056904, EBR82056907, EBR82056917LG
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberEBR82056913
ReplacesEBR82056901, EBR82056903, EBR82056904, EBR82056907, EBR82056917
ManufacturerLG
Appliance TypeDishwasher
Part TypeModule PCB Assembly / Wi-Fi PCB Assembly
✅ Cross Reference Information
Current Part NumberEBR82056913
ReplacesEBR82056901, EBR82056903, EBR82056904, EBR82056907, EBR82056917
Common Symptoms
- Wi‑Fi indicator does not illuminate when Wi‑Fi is enabled
- LG ThinQ cannot register or discover the appliance
- Remote monitoring, notifications, or app control are unavailable
- Wi‑Fi connection drops intermittently after previously working
Check Before Replacing
- Confirm that the appliance’s Wi‑Fi or Wireless indicator responds when Wi‑Fi is enabled.
- Verify that the home router provides a 2.4 GHz network; LG appliance Wi‑Fi guidance identifies 2.4 GHz as the supported band for ThinQ setup.
- Confirm the smartphone is connected to the intended network, the password is correct, and mobile data is temporarily disabled during setup.
- Try the appliance closer to the router or eliminate obvious obstructions before attributing the problem to the module.
- Power the appliance off, disconnect electrical power, wait approximately one minute, reconnect power, and retry Wi‑Fi setup.
- With power disconnected, visually check that the Wi‑Fi module connector and harness are fully seated and undamaged; do not probe or short the board.
Pro Tip
A failed ThinQ connection is not proof of a failed Wi‑Fi board. First rule out the router band, password, phone network, signal strength, and app-registration conditions; if the module is replaced, the appliance’s QR-code label should match the new module.
Part Details
Part NumberEBR82056913
Part TypeModule PCB Assembly / Wi-Fi PCB Assembly
ManufacturerLG
Appliance TypeDishwasher
Primary FunctionProvides the appliance’s Wi‑Fi connectivity for LG ThinQ network communication, remote monitoring, notifications, and available smart features.
Installation Notes
- Disconnect electrical power before accessing or replacing the module.
- Use the appliance-specific service procedure because access location and mounting differ among LG dishwashers and other appliance categories using this module.
- Disconnect and reconnect the module harness only with power removed; ensure the connector is fully seated before reassembly.
- After replacement, ensure the QR-code identification label associated with the appliance/module is updated or matched as specified by the parts instructions.
- Complete Wi‑Fi registration again in LG ThinQ after installation; use a supported 2.4 GHz network.
Verified Compatible Models
DUA412TDK.ABDESEU, DUAG17HN.ASTEEUS, LDT5665ST, LDT5678ST, LDT6809BD, LDT6809SS, LDT7797BD, LDT7797ST, LDT7808BD, LDT7808BM, LDT7808SS, LSDT9908ST, LUDP8908SN, LUDP8997SN, UPDF9904ST
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
