LG PCB Assembly, Display / Range Display Control Board EBR89296401

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Clock or display does not illuminate.
• Some digits or segments are missing.
• Display is dim, flickering, or difficult to read.
• Display information is inaccurate or incomplete.
• Display remains unresponsive while the range has power.

Check Before Replacing

• Reset power to the range at the circuit breaker, then observe whether the display returns normally.
• Confirm the range has power and that the symptom is limited to the display/interface rather than the entire appliance.
• With power disconnected, visually inspect the display-board wiring and connectors for looseness, damage, or visible corrosion; do not force connectors.
• If power and connections appear normal but the display remains dead, dim, or incomplete, the display board may require qualified service or replacement; these checks do not by themselves confirm board failure.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the range at the circuit breaker before accessing the display board.
• Access is through the range control console or display-panel area.
• Document connector locations before disconnecting the old board.
• Disconnect and reconnect wiring by the connector body, without pulling on wires or forcing misaligned connectors.
• After reassembly, restore power and verify the display and control interface operate normally.
• Use qualified appliance service if the control console or wiring cannot be safely accessed.

Verified Compatible Models

LGLREL6323D, LREL6321S, LREL6321S-FSTLLGA, LREL6321S.FS1LLGA, LREL6321S/00, LREL6323D, LREL6323S, LREL6323S.FSTLLGA, LREL6323S/00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.