Eastman 4 in. x 8 ft. Universal Dryer Venting Kit with Worm Gear Clamps 69033

Flexible 4-inch by 8-foot, 4-ply aluminum foil dryer vent duct kit supplied with two galvanized steel worm-gear clamps.

Is This the Right Part?

Common Symptoms

• Loose dryer duct connection
• Torn, crushed, or deteriorated flexible vent duct
• Air leakage at the dryer-to-wall vent connection

Check Before Replacing

• Visually inspect the duct for tears, crushing, excessive bending, or separation.
• Check that both 4-inch duct connections are secure and that the supplied clamps are tightened without damaging the foil duct.
• Inspect the vent path for visible lint accumulation or restricted airflow.

Pro Tip

Part Details

Key Features

• 4-inch diameter
• 8-foot length
• 4-ply flexible aluminum foil construction
• Includes two 4-inch worm-gear clamps
• Zinc-plated steel clamps
• Fire-resistant duct material/documented UL2158A testing

Installation Notes

• Disconnect electrical power before installation; shut off gas if the dryer is gas-powered and the installation requires moving or disconnecting the appliance.
• Use the clamps to secure the duct to the dryer and wall vent connections.
• Confirm both connections are fully seated and the duct is not crushed or sharply kinked.
• Follow the dryer and local building-code requirements for approved venting materials and routing.