Menu
Frigidaire Microwave Blower Motor – F401W9D90AP
OEM Replacement · Replaces AP7076010 · New & Used Options Available
The F401W9D90AP is the OEM Frigidaire replacement blower motor for compatible over-the-range and built-in microwave models. When this motor fails, your microwave loses the ability to circulate air, vent smoke, and remove cooking odors — restoring it is a straightforward repair that brings full ventilation performance back.
✓ Model-Specific Repair Pages
Don't see your model? Contact us and we'll help.
The blower motor drives the fan that pulls air through the microwave's ventilation system. On over-the-range models, this is the motor responsible for the exhaust fan that vents to the outside or recirculates filtered air back into the kitchen. A failed motor typically presents as a fan that won't spin, runs intermittently, or makes grinding or rattling noises during operation.
✓ Common Symptoms Fixed
Microwave fan not running during or after cooking. Exhaust fan running but not moving air. Grinding, rattling, or squealing noise from the fan. Smoke or cooking odors not clearing from the kitchen. Microwave overheating due to lack of internal airflow.
✓ Key Features & Specifications
Part Number: F401W9D90AP. Replaces: AP7076010. Brand: Frigidaire (OEM). Type: Microwave blower/exhaust fan motor. Weight: 25 lbs (shipping weight). Condition Options: New (OEM) and Used.
⚠️ Pro tip: Before replacing the blower motor, check the fan blade for obstructions or damage — a cracked or jammed fan blade can cause the same symptoms as a failed motor and is a much cheaper fix. Also inspect the motor capacitor if your model uses one; a failed capacitor will prevent the motor from starting even if the motor itself is good.
✓ Buying Options
New – OEM (F401W9D90AP): Genuine Frigidaire factory replacement blower motor. Guaranteed fit and full OEM performance for all listed compatible models.
Used: Tested pull from a working unit. A cost-effective option for older appliances where a new OEM part may exceed the appliance's remaining value.
✓ Replacement Part Numbers
F401W9D90AP · AP7076010
– Installation Tips
Disconnect power to the microwave before beginning any repair. For over-the-range models, the blower motor is typically accessed by removing the top vent grille or the unit from the cabinet. Photograph all wire connections before disconnecting. The motor mounts with screws to a bracket — transfer the fan blade from the old motor to the new one before reinstalling. Restore power and test the fan on all speed settings before closing up.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
