XPart Supply Ltd. Vacuum Dust Cup Filter HV4252, Replaces S3755-080, S3765-040, S3755, S3765

The XPart HV4252 Vacuum Dust Cup Filter is designed to restore suction performance and protect the motor by trapping fine dust and debris before it reaches internal components. It replaces S3755-080, S3765-040, S3755, S3765 when fitment is confirmed by the appliance model number.

Is This the Right Part?

Confirm the complete model number before ordering. Similar parts may use different filter dimensions, media type, or mounting configurations.

Common Symptoms

• Reduced or weak suction power
• Musty or dusty odour from exhaust air
• Vacuum shuts off due to overheating
• Visible dust or debris escaping from the exhaust

Check Before Replacing

• Inspect the dust cup — empty and rinse if full or clogged
• Check all hose connections and seals for air leaks
• Verify the filter is seated correctly and not torn or collapsed
• Confirm the model number matches the verified fitment list below

Part Details

Installation Notes

1. Disconnect power before servicing the vacuum.
2. Remove the dust cup and note the filter orientation before removal.
3. Compare the new filter with the original — confirm dimensions and mounting tabs match.
4. Inspect the dust cup seal and pre-motor foam filter for damage while the unit is open.
5. Reinstall, power on, and verify suction is restored with no unusual sounds.

Replace the dust cup filter every 3–6 months or as directed in the owner's manual for best performance.

Verified Compatible Models

S3755-080, S3765-040, S3755, S3765

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.