Frigidaire Dryer Lower Front Felt Seal with Adhesive 5303937183, Replaces 134134700

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Squeaking, rubbing, thumping, or rumbling during tumbling
• Clothes becoming caught or marked near the drum front
• Heat escaping around the drum front or unusually long drying time
• Visible wear, tearing, separation, or missing sections of felt

Check Before Replacing

• Unplug the dryer before inspection.
• With the dryer empty and unplugged, slowly rotate the drum by hand and listen or feel for rubbing, catching, or abnormal resistance at the front edge.
• Inspect the lower front felt through the open door for fraying, torn sections, gaps, detached adhesive, or areas displaced from the support rim.
• Check for clothing marks or fabric caught between the drum and front panel; do not operate the dryer if clothing is being pinched.
• If the seal appears intact, inspect related drum-support components because noise or poor drying can have other causes.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before opening or servicing the dryer.
• Access generally requires removal of the dryer front panel; disconnect door-switch or wire-harness connections only as applicable to the specific model.
• Remove the old felt and clean residue from the mounting rim before fitting the new seal.
• Align the seal evenly around the drum-support rim and press it into place progressively.
• Allow the adhesive to set and dry according to the adhesive or repair instructions before reassembling and operating the dryer.
• After reassembly, confirm that wiring is reconnected and that the drum rotates freely without pinching the seal.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.