Menu
Dryer Drum Not Spinning? Drive Pulley 5304524493 – Fix Belt Tension Fast
If your dryer runs but the drum won’t turn, or you hear squealing and thumping during the cycle, the drive pulley is the most likely cause. In most Frigidaire and Electrolux dryers, the drive pulley maintains tension on the drum belt — when it seizes, cracks, or loses its bearing, the belt slips or snaps and the drum stops entirely. ⚡ Common wear item in Frigidaire-built dryers. Part 5304524493 is the genuine OEM replacement that restores correct belt tension and smooth drum rotation immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dryer powers on and motor runs normally
- ✔ Heating element or gas igniter functions correctly
- ✔ Drum belt is intact or has just snapped (inspect before ordering)
- ✔ Drum does not turn, or turns with loud squealing or grinding
- ✔ ONLY problem is drum not spinning or excessive belt/pulley noise
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Dryer drum not spinning — motor runs but drum is stationary
- Loud squealing or squeaking noise during the cycle
- Thumping or rumbling that worsens over time
- Belt snapped — seized pulley bearing caused the failure
- Drum turns but wobbles or feels loose
- Burning rubber smell from belt slipping on a seized pulley
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this drive pulley restores normal drum operation immediately.
📦 Part Details
- Part Number: 5304524493
- Type: Dryer Drum Drive / Idler Pulley Assembly
- Replaces: OEM direct-fit drive pulley assembly — 5304524493 (no modification required)
- Brands: Frigidaire, Electrolux, and related brands built on the same platform
⚠️ Recommended While Repairing:
While the pulley is out, inspect the drum drive belt for cracking, fraying, or glazing — a worn belt on a seized pulley almost always needs replacement too. Replacing both in one visit saves a second disassembly and prevents a callback within weeks.
While the pulley is out, inspect the drum drive belt for cracking, fraying, or glazing — a worn belt on a seized pulley almost always needs replacement too. Replacing both in one visit saves a second disassembly and prevents a callback within weeks.
⚙️ Installation
Skill Level: Moderate — 30–45 minutes. Unplug the dryer before beginning. Remove the front or rear panel depending on your model to access the drum and belt routing. Release belt tension, swap the pulley, re-route the belt per the diagram label inside the cabinet, and reassemble. No special tools required — a nut driver and flathead screwdriver handle the job.
✓ Compatible Models
Confirmed compatible with Frigidaire and Electrolux dryer models using the 5304524493 drive pulley. Contact us to verify your model number before ordering.
💡 Pro Tip
Replace the Belt at the Same Time:
A seized pulley puts extreme side-load stress on the drum belt — even if the belt looks intact, it has likely been heat-stressed and will fail within months. Order the drum belt alongside this pulley and do both in one visit. It costs a fraction of a second service call and eliminates the most common repeat failure on these machines.
A seized pulley puts extreme side-load stress on the drum belt — even if the belt looks intact, it has likely been heat-stressed and will fail within months. Order the drum belt alongside this pulley and do both in one visit. It costs a fraction of a second service call and eliminates the most common repeat failure on these machines.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
