Frigidaire / Electrolux Range Dual Radiant Surface Element, 9-inch/6-inch, 3000 watts 5304533520, Replaces 140249706015, 316282000, 316465001, 316465002, 7316465001, 7316465002

Genuine OEM dual radiant surface heating element for electric ranges and cooktops; 9-inch/6-inch dual element rated at 3000 watts.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• The burner does not heat when selected.
• Only the inner or outer heating zone operates.
• The element heats unevenly or more slowly than expected.
• Visible damage or a burned/open section is present on the element assembly.

Check Before Replacing

• Confirm the cookware is centered over the selected zone and has a flat bottom; radiant elements may cycle on and off normally during operation.
• Turn off power at the range breaker or disconnect the appliance before inspecting the element.
• With power disconnected and the element wiring isolated as appropriate for the appliance service procedure, check each heating zone for continuity using a suitable multimeter procedure.
• Inspect the element terminals and wiring for loose, heat-damaged, or visibly burned connections; do not energize the appliance while connections are exposed.
• If the element tests normally, the surface-element control switch, wiring, or control system may require further diagnosis by a qualified technician.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire/Electrolux OEM dual radiant surface element.
• Dual 6-inch/9-inch cooking zones.
• 3000-watt rating.
• Designed for smooth-glass electric ranges and cooktops.
• Two independently controlled radiant heating zones.

Installation Notes

• Disconnect power at the circuit breaker or unplug the range before service; the element operates on hazardous line voltage.
• Access the element from beneath the glass cooktop according to the appliance’s service procedure.
• Photograph or label wire locations before disconnecting the old element, then reconnect wires to the corresponding terminals on the replacement.
• Inspect the element support bracket and wiring while the cooktop is open; transfer or replace supporting hardware only as required by the appliance-specific service instructions.
• Avoid uneven pressure or overtightening when securing the cooktop or element support, because the glass surface can be damaged.
• After reassembly, restore power and verify the inner and outer zones operate normally before returning the appliance to service.

Verified Compatible Models

40462051D, 80462054C, CEI30EF5GSG, CFEF3054USH, CFEH3054USC, CFEH3054UWB, CGEF3037TDE, CGEF3055KFA, EW36CC55GW3, FCFE308LAFA, FFEF3054TBG, FFEH3054UWA, FGEF3055KWC, SCRE3054AWE, TCRE3013AWA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.