Frigidaire / Electrolux Range Dual Radiant Surface Element, 9-inch/6-inch, 3000 watts 5304533520
Genuine OEM dual radiant surface heating element for electric ranges and cooktops; 9-inch/6-inch dual element rated at 3000 watts.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your range is a Frigidaire, Electrolux, or Kenmore glass-top electric model
- ✔ The burner position is a 9-inch dual-zone element (inner and outer rings)
- ✔ The infinite switch (burner control knob) tests good — continuity confirmed at multiple settings
- ✔ Power supply to the element terminals is confirmed at 240V
- ✔ ONLY problem is no heat or partial heat on this burner — not a control board or wiring fault
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Burner won’t heat at all — no response when selected at any setting
- Only inner or outer zone heats — one ring works, the other is dead
- Uneven or slow heating — element glows partially or inconsistently
- Visible burn marks, cracks, or open circuits on the element surface
- Arcing or sparking at the element terminals during operation
- Error code displayed on control panel related to surface element
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing the surface element restores full dual-zone heating immediately.
✅ Cross Reference Information
Part Number: 5304533520
Previous Part Numbers: 140249706015, 316282000, 316465001, 316465002, 7316465001, 7316465002
Part Details
- Part Number: 5304533520
- Part Type: Dual Radiant Surface Element, 9-inch/6-inch, 3000 watts
- Manufacturer: Frigidaire / Electrolux
- Appliance Type: Range
⚙️ Installation
Skill Level: Moderate — 30–45 min DIY. Disconnect power at the breaker or unplug the range before beginning — this is a 240V component and must be de-energized before any service. Lift the glass cooktop to access the element from below, label all wire connections before disconnecting, then remove the mounting hardware and swap in the new 5304533520 element. Reconnect wires to matching terminals, lower the glass top, restore power, and test both inner and outer zones before closing up. Do not overtighten mounting hardware — glass cooktops crack under uneven pressure.
💡 Pro Tip
Each zone of the dual radiant element can be tested for continuity — a good element reads approximately 20–50 ohms per zone. A reading of open (OL) on either zone confirms that zone has failed. If both zones test good but the burner still won’t heat, the infinite switch or control board is the more likely culprit. Testing first saves a return and gets you to the correct repair faster.
Related repair guides and model hubs: Frigidaire Range Surface Element 5304533520, Frigidaire Glass-Top Range Burner Not Heating, Frigidaire Range Parts, Electrolux Range Parts
Verified Compatible Models
FCFE308LAFA, CGEF3055KFA, 80462054C, FFEF3054TBG, CFEH3054UWB, SCRE3054AWE, TCRE3013AWA, FGEF3055KWC, 40462051D, CEI30EF5GSG, FFEH3054UWA, CFEF3054USH, CGEF3037TDE, CFEH3054USC, EW36CC55GW3
Fitment reminder: Match the complete appliance model number before ordering.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
