Menu
GE Dryer Squealing, Grinding, or Drum Wobbling? The Drum Bearing Glide Is the Most Common Cause — and WE3X87 Is No Longer Made.
The drum bearing glide is a low-friction polymer pad that supports the drum as it rotates, preventing metal-on-metal contact between the drum and the dryer cabinet. When it wears through, the drum squeals, grinds, or wobbles during every cycle — and the noise gets progressively worse until the drum damages the cabinet or front bulkhead. The WE3X87 is the original GE drum bearing glide for compatible older GE electric dryers. This part has been discontinued by the manufacturer and is no longer available through regular supply channels — this listing offers genuine OEM new old stock only, available while supplies last.
Symptoms of a Worn Drum Bearing Glide
- Loud squealing or screeching noise during the entire drying cycle
- Grinding or scraping sound as the drum rotates
- Drum wobbling, tilting, or feeling uneven when loaded
- Increased vibration during the cycle
- Drum rubbing against the front panel or cabinet
- Noise gets worse as the dryer heats up
- Visible wear groove or scoring on the drum contact surface
Part Details
- OEM Part Number: WE3X87
- Status: Discontinued – No Longer Available new from GE through regular channels
- Type: Dryer Drum Bearing Glide / Bearing Pad
- Compatible Brands: GE (older electric dryer models — verify by model number)
- Condition: New (genuine OEM new old stock)
- Availability: While supplies last — no restock possible
💡 Pro Tip — Check if WW02A00129 or WE1M1067 Fits Your Model Before Ordering WE3X87:
If your GE dryer model is compatible with the current OEM replacement drum glide WW02A00129 (which replaces WE1M1067, WE1M507, WE1M481, WE1M316, and WE03X37317), that part is still available new and is the better long-term solution. WE3X87 was used on older GE dryer platforms — confirm your model number against both part numbers before ordering. If your model only accepts WE3X87 and no current cross-reference fits, this new old stock is your only option. Contact us with your model number and we’ll confirm which glide applies.
If your GE dryer model is compatible with the current OEM replacement drum glide WW02A00129 (which replaces WE1M1067, WE1M507, WE1M481, WE1M316, and WE03X37317), that part is still available new and is the better long-term solution. WE3X87 was used on older GE dryer platforms — confirm your model number against both part numbers before ordering. If your model only accepts WE3X87 and no current cross-reference fits, this new old stock is your only option. Contact us with your model number and we’ll confirm which glide applies.
Installation Notes
- Skill Level: Easy to Intermediate — requires front panel removal
- Disconnect power before beginning
- Remove the dryer front panel to access the drum and bulkhead bearing surfaces
- Remove the worn glide and clean the mounting surface of any debris or lint buildup
- Press the new glide firmly into position — confirm it is fully seated
- While the front panel is off, inspect the drum felt seal and drum support bearing — replacing all worn components together prevents a repeat disassembly
- Reassemble, restore power, and run a short cycle to confirm quiet, smooth drum rotation
Compatible Models
Contact us with your full GE model number to confirm WE3X87 fitment before ordering — and to check if a current in-stock alternative applies to your model.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
